16.7 エラーコード辞典
Machbaseのエラーは、machsql、ドライバーの例外メッセージ、サーバーのトレースログに表示されます。 このページではMachbase 8.7.0の代表的なエラーと、すべてのエラーメッセージを示します。
エラーメッセージは、実行経路に応じてERR-02010: ...形式の文字列、またはドライバー固有の例外として
返されます。メッセージの文言は製品の改善に伴って変わる場合があるため、アプリケーションでは
メッセージ文字列ではなくエラーコードを基準に処理します。
SQLパーサーと関数のエラー
| コード | メッセージ | 主な原因 |
|---|---|---|
ERR-02009 | Insufficient parser memory. | SQLパーサーのメモリ不足 |
ERR-02010 | Syntax error: near token (%s). | SQL構文エラー |
ERR-02011 | Unrecognized token (%s). | 認識できないトークンを使用 |
ERR-02034 | Invalid format of time expression. | 時刻式の形式エラー |
ERR-02035 | Function [%s] does not exist. | 存在しない関数の呼び出し |
ERR-02036 | Function [%s] has an invalid argument. | 関数の引数の数または値のエラー |
ERR-02037 | Function [%s] argument data type does not match. | 関数の引数の型が不一致 |
ERR-02040 | Invalid time range. | 許容されない時間範囲 |
テーブル、列、入力データのエラー
| コード | メッセージ | 主な原因 |
|---|---|---|
ERR-02014 | Column name is duplicated: (%s). | 重複する列名を使用 |
ERR-02015 | Invalid column type: (%s). | 非対応の列型を指定 |
ERR-02024 | Table %s already exists. | 同名のテーブルがすでに存在 |
ERR-02025 | Table %s does not exist. | 対象テーブルが存在しない |
ERR-02026 | The number of insert values and that of columns are mismatched. | INSERTの列数と値の数が不一致 |
ERR-02030 | Column name (%s) does not exist. | 存在しない列を指定 |
システムリソースのエラー
| コード | メッセージ | 主な原因 |
|---|---|---|
ERR-01007 | There is no available disk space for writing <%lld>bytes to the file<%s>, errno = %d. | データファイルを書き込むディスク領域の不足 |
ERR-01346 | Current Allocate Memory / PROCESS_MAX_SIZE (%llu/%llu), increase PROCESS_MAX_SIZE property and restart. | PROCESS_MAX_SIZEの上限超過 |
全一覧の使用方法
以下の全一覧には、製品のエラーカタログの英語メッセージを表示します。KEYはソースコード内で
エラーを区別する識別子です。%s、%d、%lluなどのプレースホルダーは、エラー発生時に
オブジェクト名や数値などの実際の値に置き換わります。メッセージを照合するときはこの違いを考慮し、
可能な場合はERR-xxxxxコードで検索してください。
一覧はこのページ内で1,000番単位の範囲に分かれています。ブラウザーの検索機能でエラーコード、 エラー識別子、メッセージの一部を検索できます。メッセージだけで原因や再試行の可否を判断できない場合は、 トラブルシューティングと該当機能のドキュメントの制約も確認してください。
全エラーメッセージ
以下の 1,062 件は、Machbase 8.7.0 NFX エラーカタログから、削除された機能の項目を除いた一覧です。
ERR-00000–ERR-00999 (157)
| コード | シンボル | メッセージ原文 |
|---|---|---|
ERR-00001 | ERR_FILE_CREATE | Failed to create file<%s>, errno = %d. |
ERR-00002 | ERR_FILE_TRUNCATE | Failed to truncate file<%s>, errno = %d. |
ERR-00003 | ERR_FILE_DUP | Failed to duplicate file<%s>, errno = %d. |
ERR-00004 | ERR_FILE_COPY | Failed to copy file<%s> to file<%s>, errno = %d. |
ERR-00005 | ERR_FILE_RENAME | Failed to rename file<%s> to file<%s>, errno = %d. |
ERR-00006 | ERR_FILE_REMOVE | Failed to remove file<%s>, errno = %d. |
ERR-00007 | ERR_FILE_GETKEY | Failed to get key file<%s>, errno = %d. |
ERR-00008 | ERR_FILE_PIPE | Failed to create pipe<%s>, errno = %d. |
ERR-00009 | ERR_FILE_STAT | Failed to stat file<%s>, errno = %d. |
ERR-00010 | ERR_FILE_OPEN | Failed to open file<%s>, errno = %d. |
ERR-00011 | ERR_FILE_CLOSE | Failed to close file<%s>, errno = %d. |
ERR-00012 | ERR_FILE_SEEK | Failed to seek file<%s>, offset:%lld, Whence:%d, errno = %d. |
ERR-00013 | ERR_FILE_READ | Failed to read file<%s>, size:%llu, errno = %d. |
ERR-00014 | ERR_FILE_WRITE | Failed to write file<%s>, size:%llu, errno = %d. |
ERR-00015 | ERR_FILE_READ_SIZE | Failed to read file<%s> (offset:%llu, req size:%llu, read size: %llu), errno = %d. |
ERR-00016 | ERR_FILE_WRITE_SIZE | Failed to write file<%s> (offset:%llu, req size:%llu, read size: %llu), errno = %d. |
ERR-00017 | ERR_FILE_SYNC | Failed to sync file<%s>, errno = %d. |
ERR-00018 | ERR_FILE_LOCK | Failed to lock file<%s>, errno = %d. |
ERR-00019 | ERR_FILE_TRYLOCK | Failed to trylock file<%s>, errno = %d. |
ERR-00020 | ERR_FILE_UNLOCK | Failed to unlock file<%s>, errno = %d. |
ERR-00021 | ERR_FILE_NO_EXTENSION | There is no file extension. |
ERR-00022 | ERR_FILE_RENAME_RETRY | Failed to rename file<%s> to file<%s>, retry count<%d>, msec<%d>, errno = %d. |
ERR-00031 | ERR_STRING_SNPRINTF | Error occurred during snprintf: buffer size<%d>, errno = %d. |
ERR-00061 | ERR_ENV_GET | Failed to getenv variable<%s>, errno = %d. |
ERR-00062 | ERR_ENV_SET | Failed to setenv variable<%s> to value<%s>, errno = %d. |
ERR-00067 | ERR_DIR_OPEN | Failed to opendir <%s>, errno = %d. |
ERR-00068 | ERR_DIR_CLOSE | Failed to closedir, errno = %d. |
ERR-00069 | ERR_DIR_READ | Failed to readdir, errno = %d. |
ERR-00070 | ERR_DIR_REWIND | Failed to rewinddir, errno = %d. |
ERR-00071 | ERR_DIR_MAKE | Failed to makedir <%s>, errno = %d. |
ERR-00072 | ERR_DIR_REMOVE | Failed to removedir, errno = %d. |
ERR-00073 | ERR_DIR_SETCWD | Failed to setcwd, errno = %d. |
ERR-00074 | ERR_DIR_GETCWD | Failed to getcwd, errno = %d. |
ERR-00075 | ERR_DIR_GETHOME | Failed to gethome, errno = %d. |
ERR-00076 | ERR_DIR_PATH_TOO_LONG1 | Path<%s> is too long, errno = %d. |
ERR-00077 | ERR_DIR_PATH_TOO_LONG2 | Path<%s/%s> is too long, errno = %d. |
ERR-00078 | ERR_DIR_PATH_TOO_LONG3 | Path<%s/%s/%s> is too long, errno = %d. |
ERR-00079 | ERR_DIR_NOT_EXIST | The directory does not exist in this path<%s>, errno = %d. |
ERR-00080 | ERR_DIR_REMOVE_WITH_INFO | Failed to call removedir (%s), errno = %d. |
ERR-00091 | ULL_ERR_PMD_SQLITE3_ERROR | %1$s failed: [%2$d: %3$s]. |
ERR-00092 | ULL_ERR_PMD_SQLITE3_DISK_FULL | %1$s failed because the metadata store is full: [%2$d: %3$s]. |
ERR-00121 | ERR_STACK_CREATE | Stack create failed, errno = %d. |
ERR-00122 | ERR_STACK_PUSH | Stack push failed, errno = %d. |
ERR-00123 | ERR_STACK_POP | Stack pop failed, errno = %d. |
ERR-00131 | ERR_MEMORY_ALLOC | Failed to allocate memory(%lu bytes), errno = %d. |
ERR-00132 | ERR_MEMORY_ALLOC_BOUND | Memory allocation error (alloc'd: %llu, max: %llu). |
ERR-00133 | ERR_PM_PROCESS_MEMORY_LIMIT | Failed to allocate memory (ID = %d) (Request Size = %llu) : (Current Allocated Size / PROCESS_MAX_SIZE (%llu/%llu)). |
ERR-00141 | ERR_MEMPOOL_CREATE | Failed to create memory pool, errno = %d. |
ERR-00142 | ERR_MEMPOOL_ALLOC | Failed to allocate memory from memory pool, errno = %d. |
ERR-00151 | ERR_MUTEX_CREATE | Failed to create mutex, errno = %d. |
ERR-00152 | ERR_MUTEX_DESTROY | Failed to destroy mutex, errno = %d. |
ERR-00153 | ERR_MUTEX_LOCK | Failed to lock mutex, errno = %d. |
ERR-00154 | ERR_MUTEX_TRYLOCK | Failed to trylock mutex, errno = %d. |
ERR-00155 | ERR_MUTEX_UNLOCK | Failed to unlock mutex, errno = %d. |
ERR-00161 | ERR_QUEUE_CREATE | Failed to create queue, errno = %d. |
ERR-00162 | ERR_QUEUE_DESTROY | Failed to destroy queue, errno = %d. |
ERR-00163 | ERR_QUEUE_ENQUEUE | Failed to enqueue queue, errno = %d. |
ERR-00164 | ERR_QUEUE_DEQUEUE | Failed to dequeue queue, errno = %d. |
ERR-00171 | ERR_THR_ATTR_CREATE | Failed to create thread_attr, errno = %d. |
ERR-00172 | ERR_THR_ATTR_DESTROY | Failed to destroy thread_attr, errno = %d. |
ERR-00173 | ERR_THR_ATTR_SET_BOUND | Failed to set thread_attr bound, errno = %d. |
ERR-00174 | ERR_THR_ATTR_SET_DETACH | Failed to set thread_attr detach, errno = %d. |
ERR-00175 | ERR_THR_ATTR_SET_STACK_SIZE | Failed to set thread_attr stack size, errno = %d. |
ERR-00176 | ERR_THR_CREATE | Failed to create thread, errno = %d. |
ERR-00177 | ERR_THR_DETACH | Failed to detach thread, errno = %d. |
ERR-00178 | ERR_THR_JOIN | Failed to join thread, errno = %d. |
ERR-00179 | ERR_THR_GETID | Failed to get id of thread, errno = %d. |
ERR-00191 | ERR_THR_CV_CREATE | Failed to create thread condition variable, errno = %d. |
ERR-00192 | ERR_THR_CV_DESTROY | Failed to destroy thread condition variable, errno = %d. |
ERR-00193 | ERR_THR_CV_TIMEDWAIT | Failed to call cond_timedwait, errno = %d. |
ERR-00194 | ERR_THR_CV_SIGNAL | Failed to call cond_signal, errno = %d. |
ERR-00195 | ERR_THR_CV_BROADCAST | Failed to call cond_broadcast, errno = %d. |
ERR-00196 | ERR_THR_CV_WAIT | Failed to call cond_wait, errno = %d. |
ERR-00201 | ERR_RWMUTEX_CREATE | Failed to create rwlock, errno = %d. |
ERR-00202 | ERR_RWMUTEX_DESTROY | Failed to destroy rwlock, errno = %d. |
ERR-00203 | ERR_RWMUTEX_LOCK_READ | Failed to call rwlock_lock_read, errno = %d. |
ERR-00204 | ERR_RWMUTEX_TRYLOCK_READ | Failed to call rwlock_trylock_read, errno = %d. |
ERR-00205 | ERR_RWMUTEX_LOCK_WRITE | Failed to call rwlock_lock_write, errno = %d. |
ERR-00206 | ERR_RWMUTEX_TRYLOCK_WRITE | Failed to call rwlock_trylock_write, errno = %d. |
ERR-00211 | ERR_RBTREE_TOO_SMALL_BUFFER | RBTREE buffer<%d> is too small for value<%d>, errno = %d. |
ERR-00212 | ERR_RBTREE_CURSOR_OP_NOT_APPLICABLE | RBTREE cursor op not applicable. errno = %d. |
ERR-00213 | ERR_RBTREE_ALREADY_FREE_NODE | RBTREE node is already freed, errno = %d. |
ERR-00216 | ERR_TREEMAP_KEY_EXISTS | Key already exists. |
ERR-00221 | ERR_LZO_COMPRESS | LZO compress failed, errno = %d. |
ERR-00222 | ERR_LZO_DECOMPRESS | LZO decompress failed, errno = %d. |
ERR-00231 | ERR_GET_CPU_COUNT | Failed to get CPU count, errno = %d. |
ERR-00232 | ERR_CONF_NO_FILE | Configuration file does not exist(%S). |
ERR-00251 | ERR_TLSF_MEL_INITIALIZE | Tlsf memory manager initialization failed, errno = %d. |
ERR-00252 | ERR_TLSF_MEL_FINALIZE | Tlsf memory manager finalization failed, errno = %d. |
ERR-00253 | ERR_TLSF_MEL_ALLOC | Tlsf memory manager allocation(%lld) failed, errno = %d. |
ERR-00254 | ERR_TLSF_MEL_FREE | Tlsf memory manager free failed, errno = %d. |
ERR-00255 | ERR_TLSF_MEL_CONTROL | Tlsf memory manager control failed, errno = %d. |
ERR-00256 | ERR_TLSF_MEL_SHRINK | Tlsf memory manager shrink failed, errno = %d. |
ERR-00257 | ERR_TLSF_MEL_GETSTATISTICS | Tlsf memory manager getstatistics failed, errno = %d. |
ERR-00271 | ERR_SESSION_CLOSED | The session is closed. |
ERR-00272 | ERR_SESSION_CANCELED | The session is canceled. |
ERR-00291 | ERR_LICENSE_INVALID | The license is invalid or expired. |
ERR-00292 | ERR_LICENSE_NOTEXIST_VALUE | The value<%s> does not exist in the license file. |
ERR-00293 | ERR_LICENSE_GET_HARDWARE_KEY | Failed to get hardware key, errno =%d |
ERR-00294 | ERR_LICENSE_VERIFY | Failed to verify the license, errno = %d |
ERR-00300 | ERR_INVALID_DATE_VALUE | Invalid date value.(%s) |
ERR-00301 | ERR_INVALID_NETWORK_TYPE | Invalid network string.(%s) |
ERR-00321 | ERR_SHA_SHA1_INIT_ERROR | Error in initializing sha1, errno = %d |
ERR-00322 | ERR_SHA_SHA1_UPDATE_ERROR | Error in updating sha1, errno = %d |
ERR-00323 | ERR_SHA_SHA1_FINAL_ERROR | Error in finalizing sha1, errno = %d |
ERR-00324 | ERR_SHA_INVALID_TYPE_ERROR | Invalid SHA type.(%d) |
ERR-00325 | ERR_SHA_INVALID_HEX_STRING | Invalid SHA hex string.(%s) |
ERR-00341 | ERR_PARALLEL_JOB_MANAGER_THREAD_ABNORMAL_SHUTDOWN | Parallel job thread abnormally terminated |
ERR-00342 | ERR_PARALLEL_JOB_MANAGER_INVALID_THREAD_COUNT | The thread count should be between %d and %d |
ERR-00361 | ERR_RESFILE_BUFFER_SET_LOG_ERROR | Error in setting a log to the buffer of the result file: %s, errno = %d |
ERR-00381 | ERR_PCRE_COMPILE_ERROR | Regular expression error: an error occurred at offset %d of (%s). |
ERR-00400 | ERR_VERSION_NO_META | This DB file is older than binary (no meta-version table). Check database image and binary. |
ERR-00401 | ERR_VERSION_MISMATCH | Version mismatched. In Executable DB(%d.%d) META(%d.%d) CM(%d.%d) But, In File DB(%d.%d) META(%d.%d) CM(%d.%d) |
ERR-00402 | ERR_META_VERSION_TOO_HIGH | Incompatible meta version. File Meta Version(%d.%d) is higher than Executable Version(%d.%d) |
ERR-00420 | ERR_GET_SYS_INFO | Error in getting system information by the sysinfo, errno = %d |
ERR-00421 | ERR_GET_STACK_SIZE | Error in getting stack information by the pmuSysSetStackSize, errno = %d |
ERR-00422 | ERR_SET_STACK_SIZE | Error in setting stack information by the pmuSysSetStackSize, errno = %d |
ERR-00431 | ERR_MEM_MMAP | mmap (size<%u>) error, errno = %d |
ERR-00432 | ERR_MEM_UNMMAP | unmap (address<%p>, size<%u>) error, errno = %d |
ERR-00451 | ERR_CPU_AFFINITY_SET | Failed to set the CPU affinity [%u, %u), errno = %d |
ERR-00452 | ERR_CPU_AFFINITY_INVALID_CPUID | The IDs of CPUs should be between [0, %u), but [%u, %u) given. |
ERR-00453 | ERR_CPU_AFFINITY_INVALID_CPURANGE | Maximum abs value of CPU_AFFINITY_COUNT(%d) should be less than CPU count(%u). |
ERR-00461 | ERR_SYSCONF_CPUCNT | Failed to get the number of CPUs in sysconf, errno = %d |
ERR-00471 | ERR_PM_HEAP_INIT | Failed to initialize a heap. |
ERR-00472 | ERR_PM_HEAP_PUSH | Heap push failed, errno = %d |
ERR-00481 | ERR_PM_AUTH_NONCE_GENERATE | Failed to generate auth nonce. |
ERR-00482 | ERR_PM_AUTH_SIGN | Failed to sign auth challenge. |
ERR-00483 | ERR_PM_AUTH_VERIFY | Failed to verify auth signature. |
ERR-00484 | ERR_PM_AUTH_INVALID_KEY | Invalid auth key. |
ERR-00485 | ERR_PM_AUTH_INVALID_SIG_SCHEME | Invalid auth signature scheme. |
ERR-00486 | ERR_PM_AUTH_INVALID_SIGNATURE | Invalid auth signature. |
ERR-00487 | ERR_PM_AUTH_INVALID_NONCE | Invalid auth nonce. |
ERR-00488 | ERR_PM_AUTH_KEY_FILE_TOO_LARGE | Auth key file is too large. path=[%s], size=[%llu], limit=[%llu] |
ERR-00491 | ERR_JSON_DUMP | Error in json dump. |
ERR-00492 | ERR_JSON_LOAD | Error in json load. |
ERR-00493 | ERR_JSON_OBJ | json object error: %s |
ERR-00494 | ERR_JSON_ARR | Error in json-array. |
ERR-00495 | ERR_JSON_STR | Error in json-string (%s). |
ERR-00496 | ERR_JSON_INT | Error in json-integer (%lld). |
ERR-00497 | ERR_JSON_REAL | Error in json-real (%lf). |
ERR-00498 | ERR_JSON_COPY | Error in json copy. |
ERR-00499 | ERR_JSON_PACK | Error in json pack. |
ERR-00500 | ERR_JSON_UPACK | Error in json unpack. |
ERR-00501 | ERR_JSON_EXTR_PATH | No data matches for the json path (%s) |
ERR-00502 | ERR_JSON_PATH_LEN | Json path is too long. |
ERR-00503 | ERR_JSON_OBJECT_VALUE_SET | Error json object set (%s). |
ERR-00504 | ERR_JSON_OBJECT_ARRAY_APPEND | Error json array append. |
ERR-00505 | ERR_JSON_ENCODE | Error encode base64. |
ERR-00506 | ERR_JSON_DECODE | Error decode base64. |
ERR-00507 | ERR_JSON_OBJECT_VALUE_DEL | Error json object del (%s). |
ERR-00600 | ERR_INVALID_PROPERTY_VALUE | Invalid property value: %s. |
ERR-00601 | ERR_PM_CONVERSION_UTF8 | Failed to convert %s to UTF8. (%s, errno=%d) |
ERR-00602 | ERR_PM_CONVERTSION_STRING_LENGTH | Buffer size is not enough for code conversion. (%d > %d) |
ERR-00611 | ERR_INVALID_PROPERTY_EXPRESSION | Invalid property expression for %s: %s. |
ERR-00701 | ERR_PM_GEOHASH_INVALID_PRECISION | Geohash invalid precision (%u) |
ERR-00702 | ERR_PM_GEOHASH_INVALID_LENGTH | Geohash invalid length |
ERR-00703 | ERR_PM_GEOHASH_INVALID_DIRECTION | Geohash invalid direction |
ERR-01000–ERR-01999 (191)
| コード | シンボル | メッセージ原文 |
|---|---|---|
ERR-01000 | ERR_SM_INVALID_DISK_FILE | File<%s> is invalid. |
ERR-01001 | ERR_SM_INVALID_OBJ_STORAGE_ID | Invalid object storage id, errno = %d. |
ERR-01002 | ERR_SM_INVALID_ALREADY_FREE_OBJECT_STORAGE | Object storage<%d> already freed, errno = %d. |
ERR-01003 | ERR_SM_DBS_DIR_ALREADY_EXIST | Group storage dir<%s> already exists, errno = %d. |
ERR-01004 | ERR_SM_DBS_INVALID_OBJECT_FILENAME | Object filename<%s> is invalid, errno = %d. |
ERR-01005 | ERR_SM_DISK_FILE_IN_USE | Disk file<%s> is in use, errno = %d. |
ERR-01006 | ERR_SM_NOT_SUPPORT_FUNCTION | Functionality is not supported yet. |
ERR-01007 | ERR_SM_FILE_NO_AVAILABLE_DISK_SPACE | There is no available disk space for writing <%lld>bytes to the file<%s>, errno = %d. |
ERR-01008 | ERR_SM_FILE_DUPLICATE | Error in the duplicating file<%s>, errno = %d. |
ERR-01009 | ERR_SM_WRONG_READ_SIZE | Error in the read file size.(<io: %u>, <disk: %u>) |
ERR-01010 | ERR_SM_SPACE_NOT_AVAILABLE_4_APPEND | Used media space is reached to threshold. (%4.1lf%% cap < %4.1lf%% used) |
ERR-01011 | ERR_SM_FILE_WRITE_SIZE_MISMATCH | Error in the write file size.(<write: %u>, <written: %u>) |
ERR-01031 | ERR_SM_DB_ALREADY_MOUNTED | The database in <%s> has already been mounted. |
ERR-01032 | ERR_SM_DB_NOT_MOUNTED | The database in <%s> is not mounted. |
ERR-01033 | ERR_SM_DB_MOUNTING | The mount operation of database in <%s> is not completed. |
ERR-01034 | ERR_SM_DB_MOUNT_BUSY | The mounted database<%s> is busy. |
ERR-01035 | ERR_SM_DB_ALREADY_EXIST | The database creation is not complete. Destroy it and create a new one. |
ERR-01036 | ERR_SM_DB_CREATE_NOT_COMPLETE | The database creation is not complete. Destroy it and create a new one. |
ERR-01037 | ERR_SM_DB_MOUNT_INVALIDE_BASEDB | The mount database<%s> is not backed up from the primary database |
ERR-01038 | ERR_SM_DB_COULD_NOT_FIND_MOUNTDB | Cannot find MountDB with <TBSID: %lld>. |
ERR-01039 | ERR_SM_DB_STATE_OF_MOUNTDB_IS_ABNORMAL | Mount DB<%s>'s state is invalid. |
ERR-01101 | ERR_SM_COLUMN_PARTITION_CACHE_READ_BLOCK | Error in reading column partition cache block. Reading block of RID<%lld> in the column partition<%lld> failed, errno = %d. |
ERR-01102 | ERR_SM_INVALID_CACHE_OBJECT | Invalid cache object. |
ERR-01103 | ERR_SM_CHECKPOINT_THREAD_ABNORMAL_SHUTDOWN | Error occurred in checkpoint thread. Processing abnormal shutdown. |
ERR-01104 | ERR_SM_CACHE_WAIT_READ_PAGE | Error in waiting to read a page. |
ERR-01105 | ERR_SM_CACHE_PAGE_CLEAR_THREAD_ABNORMAL_SHUTDOWN | Error in clear thread of the page cache. |
ERR-01106 | ERR_SM_CACHE_PAGE_MAX_SET_SMALLER_SIZE | It<%llu> is smaller than the max size value of the page cache currently set<%llu>. |
ERR-01107 | ERR_SM_CACHE_PAGE_MAX_SET_IMPOSSIBLE_SIZE | It<%llu> is impossible to set a value larger than the memory size set in the current process<%llu>. |
ERR-01108 | ERR_SM_CP_INVALID_PAGE_ID | Invalid page id in column partition. Page id<%d> is greater than the page max id<%d>. |
ERR-01201 | ERR_SM_ALREADY_EXIST_TABLE_ID_TABLES | Duplicated table id<%llu> in SYS_STORAGE_TABLES, errno = %d. |
ERR-01202 | ERR_SM_ALREADY_EXIST_TABLE_ID_COLUMNS | Duplicated table id<%llu>, column id<%u> in the SYS_STORAGE_COLUMNS, errno = %d. |
ERR-01203 | ERR_SM_NOT_EXIST_TABLE_ID_IN_TABLES | Table id<%lld> does not exist in SYS_STORAGE_TABLES, errno = %d. |
ERR-01204 | ERR_SM_ALREADY_EXIST_INDEX_ID_INDEXES | Duplicated (table id<%llu>, index id<%llu>) in SYS_STORAGE_INDEXES, errno = %d. |
ERR-01205 | ERR_SM_ALREADY_EXIST_INDEX_ID_COLUMNS | Duplicated (table id<%llu>, index id<%llu>, column id<%u>) in SYS_STORAGE_INDEXES_COLUMNS, errno = %d. |
ERR-01206 | ERR_SM_NOT_EXIST_INDEX_ID_IN_INDEXES | Index ID<%llu> of table ID<%llu> does not exist in SYS_STORAGE_INDEXES, errno = %d. |
ERR-01207 | ERR_SM_INVALID_RECOVERY_MODE_STRING | Available recovery modes: simple, complex, reset |
ERR-01301 | ERR_SM_NOT_EXIST_PARTION_RANGE | Partition range does not exist. Partition id is less than <%lld> in the table(id<%lld>) with partitions between <%lld> and <%lld>. |
ERR-01302 | ERR_SM_NOT_EXIST_RECORD_RANGE | Invalid record range. No such record whose id is less than <%llu> in the table(id<%llu>) with records between <%llu> and <%llu>. |
ERR-01303 | ERR_SM_TOO_MANY_COLUMNS_FOR_TABLE | Maximum number of columns in a table is %d. |
ERR-01304 | ERR_SM_INVALID_COLUMN_ID | Invalid column ID (<%d>). |
ERR-01305 | ERR_SM_TABLE_NOT_EXIST | Invalid table ID (<%llu>). |
ERR-01306 | ERR_SM_TABLE_ALREADY_DROPPED | Table has been dropped. |
ERR-01307 | ERR_SM_TABLE_STRUCTURE_MODIFIED | Table structure was modified. |
ERR-01308 | ERR_SM_TABLE_INVALID_FIXED_COLUMN_SIZE | Invalid fixed column size. Invalid value size(<%u>) for the fixed column. |
ERR-01309 | ERR_SM_TABLE_VAR_COLUMN_SIZE_TOO_BIG | Invalid varying column size. Value size(<%u>) for the variable column is greater than the max size (<%u>). |
ERR-01310 | ERR_SM_TABLE_FLUSH_THREAD_ABNORMAL_SHUTDOWN | Table flush thread terminated abnormally. |
ERR-01311 | ERR_SM_TABLE_COLUMN_PARTITION_PREPARE_THREAD_ABNORMAL_SHUTDOWN | Table column partition prepare thread terminated abnormally. |
ERR-01312 | ERR_SM_TABLE_COLUMN_PARTITION_FILE_READ_HEAD | Failed to read the head of the table column partition file (<%s>). |
ERR-01313 | ERR_SM_TABLE_COLUMN_PARTITION_FILE_READ | Failed to read the table column partition file (<%s>). |
ERR-01314 | ERR_SM_TABLE_INDEX_BUILD_THREAD_ABNORMAL_SHUTDOWN | Index build thread terminated abnormally. |
ERR-01315 | ERR_SM_TABLE_INVALID_TYPE | Invalid table type<%d>. |
ERR-01316 | ERR_SM_TABLE_COLUMN_SIZE_TOO_BIG | Column size<%u> is too big. |
ERR-01317 | ERR_SM_TABLE_COLUMN_INVALID_TIME_VALUE | Value of the time column(<%lld>) is less than the last time value(<%lld>). |
ERR-01318 | ERR_SM_TABLE_COLUMN_INVALID_VARCHAR_SIZE | The size of VARCHAR column must be less than (<%llu>). |
ERR-01319 | ERR_SM_TABLE_COLUMN_INVALID_VALUE_SIZE | The size of column value must be less than (<%u>). |
ERR-01320 | ERR_SM_TABLE_COLUMN_REFERENCED_BY_INDEX | There is an index on the column(<%u>) of the table(<%llu>) |
ERR-01321 | ERR_SM_TABLE_NOT_SUPPORT_FUNCTION | This feature is not supported on this table type. |
ERR-01322 | ERR_SM_TABLE_COLUMN_INVALID_NEWSIZE | The new column size(<%u>) should be greater than the old one(<%u>) |
ERR-01323 | ERR_SM_TABLE_COLUMN_MAX | The table(%llu) reached max column count limit (%u) already. |
ERR-01324 | ERR_SM_TABLE_COLUMN_PARTITION_FILE_ADJUST_END_RID | An error occurred adjusting end rid of the table<%llu> column partition(<%llu>), errno = %d. |
ERR-01325 | ERR_SM_TABLE_COLUMN_TOO_SMALL_END_RID | The end RID<%lld> of the column<%d> is less than the end RID<%llu> of the table<%llu> |
ERR-01330 | ERR_SM_TABLE_COLUMN_NOT_FOUND | The column with ID<%hu> does not exist in the table with ID<%llu> |
ERR-01331 | ERR_SM_TABLE_CHECKPOINT_THREAD_ABNORMAL_SHUTDOWN | Table checkpoint thread terminated abnormally. |
ERR-01332 | ERR_SM_TABLE_NOT_EXIST_PARTION | Partition ID <%llu> of the table(id<%llu>) does not exist between <%llu> and <%llu>. |
ERR-01333 | ERR_SM_TABLE_MOUNT_ALREADY | The table<%llu> in the backup database<%s> has been mounted already. |
ERR-01334 | ERR_SM_TABLE_MOUNT_BUSY_WITH_MOUNTING | The table is busy with mounting. |
ERR-01335 | ERR_SM_TABLE_MOUNT_BUSY_WITH_UNMOUNTING | The mounted table is busy with unmounting. |
ERR-01336 | ERR_SM_TABLE_MOUNT_INVALID_STATE | The mounted table is invalid. |
ERR-01337 | ERR_SM_TABLE_MOUNT_IS_BUSY | The mounted table is busy. |
ERR-01338 | ERR_SM_TABLE_MOUNT_NOT_EXIST | The table is not mounted. |
ERR-01339 | ERR_SM_TABLE_MOUNT_TABLE_NOT_SAME_WITH_TABLE | The table<%llu> of the backup tablespace<%s> is different from the table in main database. |
ERR-01340 | ERR_SM_TABLE_MOUNT_TABLE_DROPPED_IN_MAIN_DATABASE | The table<%llu> of the backup tablespace<%s> is dropped from the main database. |
ERR-01341 | ERR_SM_TABLE_HAS_MOUNTED_TABLE | There is a mounted table in the table<%llu>. |
ERR-01342 | ERR_SM_TABLE_MOUNT_HAS_FUTURE_DATA | The mount table<end_rid:%llu> has more furture data than the base table<end_rid:%llu. |
ERR-01343 | ERR_SM_TABLE_UPDATE_COLUMN_INDEX_CREATED | Cannot update columns with indexes in VOLATILE / LOOKUP table. |
ERR-01344 | ERR_SM_TABLE_VOLITILE_MEMORY_LIMIT | The memory size<%llu bytes> of VOLATILE / LOOKUP tables exceeds <%llu bytes>. |
ERR-01345 | ERR_SM_TABLE_COLUMN_VALUE_NOT_NULL | The value of the column<%u> must not be NULL |
ERR-01346 | ERR_SM_PROCESS_MEMORY_LIMIT | Current Allocate Memory / PROCESS_MAX_SIZE (%llu/%llu), increase PROCESS_MAX_SIZE property and restart. |
ERR-01401 | ERR_SM_INDEX_INVALID_TYPE | Invalid index type. Index type<%d> does not exist. |
ERR-01402 | ERR_SM_INDEX_NOT_EXIST_IN_TABLE | Index id(<%llu>) does not exist in table id <%llu>. |
ERR-01403 | ERR_SM_INDEX_INVALID_COLUMN_COUNT | Index has invalid column count(<%d>). |
ERR-01404 | ERR_SM_INDEX_INVALID_KEYVALUE_COUNT | Index has invalid key value count(<%d>). |
ERR-01405 | ERR_SM_INDEX_INVALID_KEYVALUE_SIZE | Index has invalid key value size(<%d>). |
ERR-01406 | ERR_SM_INDEX_INVALID_FILE | Index column file(<%s>) is invalid. |
ERR-01407 | ERR_SM_INDEX_COLUMN_PARTITION_FILE_READ_HEAD | Failed to read the head of the index column partition file(<%s>). |
ERR-01408 | ERR_SM_INDEX_COLUMN_PARTITION_FILE_READ | Failed to read the index column partition file(<%s>). |
ERR-01409 | ERR_SM_INDEX_COLUMN_INVALID_COLUMN_TYPE | Type of the column for the index is invalid. |
ERR-01410 | ERR_SM_INDEX_FLUSH_THREAD_ABNORMAL_SHUTDOWN | Index flush thread terminated abnormally. |
ERR-01411 | ERR_SM_INDEX_BUILD_THREAD_ABNORMAL_SHUTDOWN | Index build thread terminated abnormally. |
ERR-01412 | ERR_SM_KDW_INDEX_INVALID_KEY_SIZE | The keyword size<%d> should be less than the max size<%d>. |
ERR-01413 | ERR_SM_INDEX_INVALID_WORDBITCNT | The word bit count(%d) is over than %d in the partition<%lld> of the index <%lld> |
ERR-01414 | ERR_SM_INDEX_INVALID_KEYVALCNT | Invalid key count <%u> is not equal to the count <%u> in partition <%lld> of index <%lld>. |
ERR-01415 | ERR_SM_INDEX_INVALID_LEVEL | The level<%u> of the index is bigger than the max level<%u> |
ERR-01416 | ERR_SM_INDEX_INVALID_LEVEL_PART_SIZE | The partition size<%u> of level<%u> is bigger than the max level<%u> |
ERR-01417 | ERR_SM_INDEX_ALREADY_DROPPED | The index has been dropped. |
ERR-01418 | ERR_SM_INDEX_UNIQUE_VIOLATION | The key already exists in the unique index. |
ERR-01419 | ERR_SM_INDEX_PRIMARY_INDEX_ALREADY_CREATED | The primary index is already created on the table. |
ERR-01420 | ERR_SM_INDEX_INVALID_KEYVALUE_N_BITVECTOR_COUNT | The number<%llu> of key values is different from the number<%llu> of bitvectors. |
ERR-01421 | ERR_SM_INDEX_LSM_INVALID_PART_FILE | The partition file<%llu> on the level<%u> of the index<%llu> is invalid.(KPC:%u, BPC:%u) |
ERR-01422 | ERR_SM_INDEX_PRAIMARY_INDEX_NOT_NULL | NULL value is not allowed for the primary index column |
ERR-01423 | ERR_SM_KEYVALUE_CACHE_EXHAUSTED | TAG cache exhausted, increase TAG_CACHE_MAX_MEMORY_SIZE(%llu) |
ERR-01424 | ERR_SM_KEYVALUE_CACHE_TIMEOUT | Could not allocate TAG cache: (Table,part=%llu,%llu) offset/size=%llu/%llu |
ERR-01425 | ERR_SM_KEYVALUE_INDEX_MEMORY_LIMIT | Failed to allocate index memory (Current Allocated Size / Threshold size (%llu/%llu)). |
ERR-01426 | ERR_SM_KEYVALUE_NOT_READY_TO_BUILD_INDEX | Not ready to build keyvalue index (Current Count / Target Count (%llu/%llu) in File). |
ERR-01501 | ERR_SM_CPFILE_INVALID_PAGE_ID | Invalid page id in cpfile. Page id<%d> for the column partition file<%s> is greater than the page max id. |
ERR-01502 | ERR_SM_CPFILE_INVALID_PAGE_TIMESTAMP | Error in reading page<%d> in the column partition file<%s>. Page timestamps <head:%lld, tail:%lld> are invalid. |
ERR-01503 | ERR_SM_CPFILE_INVALID_PAGE_CHECKSUM | Error in reading page<%d> in the column partition file<%s>. Page checksum <write:%#X, read:%#X> are invalid |
ERR-01504 | ERR_SM_CPFILE_FILE_INVALID_SIZE | The size<%u> of the column partition file<%s> is too small. It is supposed to be greater than the size<%u> |
ERR-01505 | ERR_SM_CPFILE_FILE_INVALID_PAGE_UPDATE | The offset<%u> and size<%u> of the update value for the page<id:%u, offset:%u, size:%u> in the column partition file<%s> is invalid |
ERR-01506 | ERR_SM_CPFILE_INVALIDE_FILE_HEAD_CRC | The checksum<write:%#X, read:%#X> of the head of the column partition file<%s> is invalid. |
ERR-01551 | ERR_SM_FDCACHE_GET_FD_FOR_FILE | Error in getting the fd of the file<%s> from the fd cache. |
ERR-01601 | ERR_SM_AGER_THREAD_ABNORMAL_SHUTDOWN | Ager thread terminated abnormally. |
ERR-01631 | ERR_SM_BACKUP_NOT_EXIST_BACKUP_ROOT_DIR | There is no root dir<%s> for the database backup. |
ERR-01632 | ERR_SM_BACKUP_NOT_DATABASE_DESTROYED | The database is not destroyed. |
ERR-01633 | ERR_SM_BACKUP_STATFILE_WRITE | Failed to write data<%u> of the backup stat file<%s>. |
ERR-01634 | ERR_SM_BACKUP_STATFILE_READ | Failed to read data<%u> of the backup stat file<%s>. |
ERR-01635 | ERR_SM_BACKUP_STATFILE_INVALID | The backup statfile<%s> is invalid(CRC<H:%u, B:%u, T:%u). |
ERR-01636 | ERR_SM_BACKUP_NOT_COMPLETE | The backup <%s> is not completed. |
ERR-01637 | ERR_SM_BACKUP_DIR_ALREADY_EXIST | The backup <%s> has already exist. |
ERR-01638 | ERR_SM_BACKUP_INVALID_END_RID | The end rid<%llu> of the table<%llu> in the restored database is invalid. |
ERR-01639 | ERR_SM_BACKUP_NAME_TOO_LONG | The name<%s> of backup is too long, errno = %d. |
ERR-01640 | ERR_SM_BACKUP_FILE_ALREADY_EXIST | The backup file<%s> already exists. |
ERR-01641 | ERR_SM_BACKUP_FILE_INVALID_MAGIC_STRING | The backup file<%s> has the invalid magic string<%s>. |
ERR-01642 | ERR_SM_BACKUP_FILE_HEAD_INVALID_CRC32 | The header of backup file<%s> has the invalid crc32<%u>. |
ERR-01643 | ERR_SM_BACKUP_FILE_INVALID_FILENAME_LEN | Length<%u> of backup file<%s> is too long. |
ERR-01644 | ERR_SM_BACKUP_FILE_INVALID_PAGESIZE | The page size <%u> of backup file<%s> is invalid. |
ERR-01645 | ERR_SM_BACKUP_FILE_INVALID_SIZE | The file size <%llu> of the head is different from the size<%llu> on the disk. |
ERR-01646 | ERR_SM_BACKUP_FILE_INVALID_STATE | The backup file is invalid since the backup is not completed. |
ERR-01647 | ERR_SM_INC_BACKUP_NOT_LATEST | An incremental backup requires a previous backup. |
ERR-01648 | ERR_SM_INC_BACKUP_TARGET_NOT_SAME | Backup targets are different from that of previous target. |
ERR-01701 | ERR_SM_TBS_REFERENCED_BY_OBJECTS | The tablespace<%s> is still referenced by other objects such as tables and indexes. |
ERR-01702 | ERR_SM_TBS_NOT_EXIST | The tablespace<%s> does not exist in the database. |
ERR-01703 | ERR_SM_TBS_CANNOT_DROP_SYSTEM_TBS | The SYSTEM_TABLESPACE cannot be dropped. |
ERR-01704 | ERR_SM_TBS_ALEADY_EXIST | Tablespace already exists. <%s> |
ERR-01705 | ERR_SM_TBS_DISKDIR_ALEADY_EXIST | The dir<%s> for the tablespace<%s> of datadisk<%s> already exists. |
ERR-01706 | ERR_SM_TBS_PHYDISK_NOT_EXIST | Disk<%s> does not exist in the tablespace<%s>. |
ERR-01707 | ERR_SM_TBS_PHYDISK_INVALID_PARALLEL_IO | The parallel I/O of a disk should be between %d and %d. |
ERR-01708 | ERR_SM_TBS_FILE_READ | Failed to read <%ld> bytes from the file<%s>, errno = %d. |
ERR-01709 | ERR_SM_TBS_FILE_PAGE_INVALID_TIMESTAMP | The page<offset:%u, size:%u> of the file<%s> is invalid because it has the invalid timestamp<head:%lld, tail:%lld> |
ERR-01710 | ERR_SM_TBS_FILE_PAGE_INVALID_CRC32 | The page<offset:%u, size:%u> of the file<%s> is invalid because it has the invalid crc<memory:%u, disk:%u> |
ERR-01711 | ERR_SM_TBS_VIRDISK_DIR_CREATE | Failed to create directory<%s> for virtual disk. |
ERR-01712 | ERR_SM_TBS_MEMORY_DIR_SHORTAGE | Failed to allocate memory for directory to be removed. |
ERR-01801 | ERR_SM_EXTCP_WAIT_READ_VALUE | Error in waiting to read value: value offset<%lld>, value size<%u>, and file<%s> |
ERR-01821 | ERR_SM_DWFILE_INVALID_IMAGE | The image in the DWFile<%s> is invalid. |
ERR-01841 | ERR_SM_ART_ABORT | The operation is aborted by ART. |
ERR-01851 | ERR_SM_NO_VAR_IN_TAG | Variable length columns are not allowed in tag table. |
ERR-01852 | ERR_SM_DELETE_IN_PROGRESS | Another deletion is in progress for table <%llX>. |
ERR-01853 | ERR_SM_KEYVALUE_CREATE_APPENDFILE | Cannot create append file for Key-Value table <%llX>, errno = %d. |
ERR-01854 | ERR_SM_KEYVALUE_SYNC_APPENDFILE | Cannot sync append file for Key-Value table <%llX>, errno = %d. |
ERR-01855 | ERR_SM_KEYVALUE_CLOSE_APPENDFILE | Cannot close append file for Key-Value table <%llX>, errno = %d. |
ERR-01856 | ERR_SM_KEYVALUE_CREATE_DATAFILE | Cannot create data file <%llX> for Key-Value table <%llX>, errno = %d. |
ERR-01857 | ERR_SM_KEYVALUE_OPEN_DATAFILE | Cannot open data file <%llX> for Key-Value table <%llX>, errno = %d. |
ERR-01858 | ERR_SM_KEYVALUE_READ_DATAFILE | Cannot read data file <%llX> for Key-Value table <%llX>, errno = %d. |
ERR-01859 | ERR_SM_KEYVALUE_WRITE_DATAFILE | Cannot write data file <%llX> for Key-Value table <%llX>, errno = %d. |
ERR-01860 | ERR_SM_KEYVALUE_CORRUPTED_DATAFILE | Data file <%llX> is corrupted for Key-Value table <%llX>. |
ERR-01861 | ERR_SM_KEYVALUE_CREATE_INDEXFILE | Cannot create index file <%llX> for Key-Value table <%llX>, errno = %d. |
ERR-01862 | ERR_SM_KEYVALUE_OPEN_INDEXFILE | Cannot open index file <%llX> for Key-Value table <%llX>, errno = %d. |
ERR-01863 | ERR_SM_KEYVALUE_READ_INDEXFILE | Cannot read <.%s> file <%llX> for Key-Value table <%llX>, errno = %d. |
ERR-01864 | ERR_SM_KEYVALUE_WRITE_INDEXFILE | Cannot write <.%s> file <%llX> for Key-Value table <%llX>, errno = %d. |
ERR-01865 | ERR_SM_KEYVALUE_CORRUPTED_INDEXFILE | Index file <%llX> is corrupted for Key-Value table <%llX>. |
ERR-01866 | ERR_SM_KEYVALUE_IOERROR | Cannot perform I/O for Key-Value table <%llX>. |
ERR-01867 | ERR_SM_KEYVALUE_INVALID_PATH_APPENDFILE | Invalid path to append file for Key-Value table <%llX>, errno = %d. |
ERR-01868 | ERR_SM_KEYVALUE_OPEN_APPENDFILE | Cannot open append file for Key-Value table <%llX>, errno = %d. |
ERR-01869 | ERR_SM_KEYVALUE_NO_DATAFILE | RID-based SELECT is not allowed without datafile, Table<%llX>/RID<%llu>. |
ERR-01870 | ERR_SM_KEYVALUE_OPEN_MOUNTED_APPENDFILE | Cannot open append file for mounted Key-Value table <%llX>, errno = %d. |
ERR-01871 | ERR_SM_KEYVALUE_READ_MOUNTED_APPENDFILE | Cannot read append file for mounted Key-Value table <%llX>, errno = %d. |
ERR-01872 | ERR_SM_BACKUP_IN_PROGRESS | Another backup is in progress for table <%llX>. |
ERR-01873 | ERR_SM_KEYVALUE_NO_INDEXFILE | No index-file <%llx> for Key-Value table Table<%llX>. |
ERR-01874 | ERR_SM_KEYVALUE_OPEN_FILE | Cannot open file <%llX> for Key-Value table <%llX> path<%s>, errno = %d. |
ERR-01875 | ERR_SM_KEYVALUE_NO_UNPURGED_NODE | Cannot find unpurged node for Key-Value table <%llX>. |
ERR-01876 | ERR_SM_KEYVALUE_FILE_DECOMPRESS | Failed to use %s to decompress file <%llX> for key-value table <%llx>, error = %d. |
ERR-01877 | ERR_SM_KEYVALUE_NOT_FOUND_STAT_DATA | Tag stat for id[%llu] is not found. |
ERR-01878 | ERR_SM_STAT_WRITE_FILE | Cannot write stat file for Key-Value table <%llX> path<%s> errno = %d. |
ERR-01879 | ERR_SM_STAT_READ_FILE | Cannot read stat file for Key-Value table <%llX> path<%s> errno = %d. |
ERR-01880 | ERR_SM_STAT_OPEN_FILE | Cannot open stat file for Key-Value table <%llX> path<%s>, errno = %d. |
ERR-01881 | ERR_SM_STAT_INVALID_FILE | Stat File Invalid TableID[%llu], TablePath[%s]. |
ERR-01882 | ERR_SM_KEYVALUE_NO_KVINDEXFILE | No kvindex-file <%llx> for Key-Value table Table<%llX>. |
ERR-01883 | ERR_SM_KEYVALUE_INVALID_TIME_VALUE | Value of the time column(<%lld>) must be greater than or equal to <%lld>. |
ERR-01884 | ERR_SM_KEYVALUE_THREAD_STOPPED | keyvalue table<%llx> thread for [%s] stopped. |
ERR-01885 | ERR_SM_KEYVALUE_DATA_CORRUPTED | Data row value is corrupted: required RID<%llu>, value RID<%llu>. |
ERR-01886 | ERR_SM_KEYVALUE_VDATA_CORRUPTED | %s varchar data is corrupted: required VRID<%u>, value VRID<%u>. |
ERR-01887 | ERR_SM_UPDATE_IN_PROGRESS | Another update is in progress for table <%llX>. |
ERR-01900 | ERR_SM_SNAPSHOT_NOT_VALID | Snapshot ID <%s> is invalid. |
ERR-01901 | ERR_SM_SNAPSHOT_NO_TABLE | Cannot snapshot with no table. |
ERR-01902 | ERR_SM_SNAPSHOT_TIMEOUT | Snapshot timed out. |
ERR-01903 | ERR_SM_SNAPSHOT_NOT_EXISTS | Snapshot ID <%s> does not exist. |
ERR-01904 | ERR_SM_SNAPSHOT_ALREADY_EXISTS | Snapshot ID <%s> already exists. |
ERR-01910 | ERR_SM_FREEZE_NO_TABLE | Cannot freeze with no table. |
ERR-01911 | ERR_SM_ALREADY_FROZEN | Snapshot already frozen. |
ERR-01951 | ERR_SM_FUNCTION_CALL | Failed to call function <%s>, errno=%d |
ERR-01952 | ERR_SM_TABLE_RESOURCE_BUSY | Table (0x%llx) resource busy (%s). |
ERR-02000–ERR-02999 (420)
| コード | シンボル | メッセージ原文 |
|---|---|---|
ERR-02000 | QPE_TEST | Memory allocation error, Error code = %d |
ERR-02001 | ERR_QP_OPEN_META | Error in opening meta. |
ERR-02002 | ERR_QP_EXEC_META | Error in executing meta. |
ERR-02003 | ERR_QP_CLOSE_META | Error in closing meta. |
ERR-02004 | ERR_QP_CRT_HASH | Error in creating hash. (errno=%d) |
ERR-02005 | ERR_QP_ALLOC_MEM | Error in allocating memory. |
ERR-02006 | ERR_QP_HASH_ADD | Error in adding hash. (errno=%d) |
ERR-02007 | ERR_QP_FETCH_META | Error in fetching meta. |
ERR-02008 | ERR_QP_HASH_TRAV | Error in traversing hash. |
ERR-02009 | ERR_QP_MEMORY_INSUFFICIENT | Insufficient parser memory. |
ERR-02010 | ERR_QP_PARSE_ERROR | Syntax error: near token (%s). |
ERR-02011 | ERR_QP_TOKEN_ERROR | Unrecognized token (%s). |
ERR-02012 | ERR_QP_SINGLE_ROW_ERROR | Single row error. Single-row subquery returns more than one row. (NOT USED) |
ERR-02013 | ERR_QP_NEED_GROUPBY_ERROR | A GROUP BY clause is required before HAVING. |
ERR-02014 | ERR_QP_COLUMN_NAME_DUPLICATED | Column name is duplicated: (%s). |
ERR-02015 | ERR_QP_COLUMN_TYPE_INVALID | Invalid column type: (%s). |
ERR-02016 | ERR_QP_NO_TABLE_PROPETY_FOUND | Table property (%s) does not exist. |
ERR-02017 | ERR_QP_NO_TABLE_PROPETY_CONVERT | Error in converting table property. Cannot convert string (%s) to integer. |
ERR-02018 | ERR_QP_NO_TABLE_PROPETY_VALUE_RANGE | Table property value is out of range: (%s). |
ERR-02019 | ERR_QP_VARCHAR_TYPE_SIZE_ERROR | Column size must be specified for a variable-length column type. |
ERR-02020 | ERR_QP_TYPE_SIZE_ZERO | Invalid size specified. Cannot specify type size to (%s). |
ERR-02021 | ERR_QP_CREATE_INDEX_INVALID_BITMAP_DATATYPE | Cannot create bitmap index on data type (%s) |
ERR-02022 | ERR_QP_CREATE_INDEX_INVALID_KEYWORD_DATATYPE | Cannot create keyword index on data type (%s) |
ERR-02023 | ERR_QP_SNPRINTF_ERROR | snprintf function error (%d). |
ERR-02024 | ERR_QP_TABLE_CREATE_DUPLICATE | Table %s already exists. |
ERR-02025 | ERR_QP_TABLE_NO_EXISTS | Table %s does not exist. |
ERR-02026 | ERR_QP_TABLE_INSERT_COLUMN_MISMATCH | The number of insert values does not match the number of columns. |
ERR-02027 | ERR_QP_TABLE_INSERT_COLUMN_INT_CONVERSION | Error in table insert column integer conversion. Insert value conversion to integer error (%s). |
ERR-02028 | ERR_QP_TABLE_INSERT_COLUMN_DOUBLE_CONVERSION | Error in table insert column double conversion. Insert value conversion to double error (%s) |
ERR-02029 | ERR_QP_TABLE_INSERT_COLUMN_TIME_FORMAT | Error in table insert column time format. Insert _arrival_time value conversion error. |
ERR-02030 | ERR_QP_TABLE_INSERT_NO_COLUMN | Column name (%s) does not exist. |
ERR-02031 | ERR_QP_TABLE_RESOURCE_BUSY | Resource busy (%s). |
ERR-02032 | ERR_QP_TYPE_COMPARE_CONVERSION | Type conversion error: error occurred while comparing the values of type (%s) and type (%s). |
ERR-02033 | ERR_QP_TYPE_CONCAT | Cannot concatenate non varchar types. |
ERR-02034 | ERR_QP_TIME_FORMAT | Invalid format of time expression. |
ERR-02035 | ERR_QP_FUNCTION_NO_EXISTS | Function [%s] does not exist. |
ERR-02036 | ERR_QP_FUNCTION_ARG | Function [%s] has an invalid argument. |
ERR-02037 | ERR_QP_FUNCTION_ARG_TYPE | Function [%s] argument data type does not match. |
ERR-02038 | ERR_QP_TABLE_NO_SUCH_FOR_STAR | Table [%s] does not exist. |
ERR-02039 | ERR_QP_TABLE_NO_SPECIFIED_FOR_STAR | No table specified in the target list. |
ERR-02040 | ERR_QP_TIME_RANGE_ERROR | Invalid time range. |
ERR-02041 | ERR_QP_TIME_NEGATIVE_ERROR | Time value must be positive. |
ERR-02042 | ERR_QP_NULL_EXPRESSION | Expression cannot have a NULL value. |
ERR-02043 | ERR_QP_AGGR_WHERE | Group function is not allowed here. |
ERR-02044 | ERR_QP_NO_GROUPBY | Not a GROUP BY expression. |
ERR-02045 | ERR_QP_TYPE_UNKNOWN | Type is not supported(typecode is %u). Internal error. |
ERR-02046 | ERR_QP_BUFFER_SHORTAGE | String buffer is not enough. |
ERR-02047 | ERR_QP_LOCK_BUFFER_SHORTAGE | Lock buffer is not enough. Table counts are too many. |
ERR-02048 | ERR_QP_BIND_COUNT_OVERFLOW | Bind parameter count is overflowed. (max=%u) |
ERR-02049 | ERR_QP_BIND_UNABLE | Cannot apply bind parameter. |
ERR-02050 | ERR_QP_BIND_BUFFER_CORRUPTED | Bind data from client is corrupted. |
ERR-02051 | ERR_QP_BIND_TYPE_UNKNOWN | Bind data type unknown (typecode is %u). |
ERR-02052 | ERR_QP_INSERT_UNABLE_TABLE | Cannot insert data into this table (%s). |
ERR-02053 | ERR_QP_TYPE_VALUE_CONVERSION | Failed to convert type (%s) to type (%s). |
ERR-02054 | ERR_QP_AGGR_ERROR_ON_FUNCTION | Aggregation error on function usage (NOT USED) |
ERR-02055 | ERR_QP_ERROR_ON_INSERT_VALUE | Invalid insert value. |
ERR-02056 | ERR_QP_COLUMN_NAME_NOT_FOUND | Column name (%s) not found. |
ERR-02057 | ERR_QP_SEARCH_STRING_ERROR | Only literal type can be used in SEARCH keyword. |
ERR-02058 | ERR_QP_INDEX_CREATE_DUPLICATE | Index %s already exists |
ERR-02059 | ERR_QP_INDEX_NO_EXISTS | Index %s does not exist |
ERR-02060 | ERR_QP_INDEX_ONLY_ONE_COLUMN | Composite index is not supported. |
ERR-02061 | ERR_QP_DIVIDE_BY_ZERO | Cannot divide a value by zero. |
ERR-02062 | ERR_QP_DATE_CALC_INVALID | Cannot calculate date type. |
ERR-02063 | ERR_QP_SEARCH_TYPE_INVALID | Invalid search type. Search type must be VARCHAR. |
ERR-02064 | ERR_QP_ADD_TIME_FORMAT_ERROR | Invalid time format. (format: "year/mon/day hour:min:sec") |
ERR-02065 | ERR_QP_NO_INDEX_PROPETY_FOUND | Index property (%s) does not exist. |
ERR-02066 | ERR_QP_INDEX_PROPETY_VALUE_INVALID | Invalid index property value: (%s). |
ERR-02067 | ERR_QP_TO_ADDR4_FUNCTION_ARG | Error in TO_ADDR4 function aggregate. Argument type to TO_ADDR4 function must be an integer. |
ERR-02068 | ERR_QP_IPV4_FORMAT | Invalid IPv4 address format (%s). |
ERR-02069 | ERR_QP_INDEX_FOR_INVALID_TABLE | %s index can only be created for %s table. |
ERR-02070 | ERR_QP_INDEX_NEEDED_FOR_SEARCH | Search predicate needs keyword index. |
ERR-02071 | ERR_QP_INDEX_COUNT | Only one index is allowed for a single column. |
ERR-02072 | ERR_QP_DELETE_UNABLE_TABLE | Cannot delete data from this table (%s). |
ERR-02073 | ERR_QP_TABLE_DELETE_CONDITION | Invalid DELETE condition. %s |
ERR-02074 | ERR_QP_TABLE_DELETE_TIME_RANGE | Invalid delete time range. BEFORE time range should be older than present. |
ERR-02075 | ERR_QP_TABLE_DROP_NO_INFO_IN_DB | Table(%s) record does not exist in meta database. |
ERR-02076 | ERR_QP_TABLEID_DROP_NO_INFO_IN_DB | Table(%lld) record does not exist in meta database. |
ERR-02077 | ERR_QP_VARCHAR_SIZE_MAX | Invalid %s size. %s type size cannot be more than %d. |
ERR-02078 | ERR_QP_UNKNOWN_STMT_TYPE | Invalid statement type. Statement type(%d) is unsupported. |
ERR-02079 | ERR_QP_FUNCTION_ARG_COUNT | The number of arguments for function (%s) does not match. |
ERR-02080 | ERR_QP_USER_NOT_EXIST | User (%s) does not exist. |
ERR-02081 | ERR_QP_USER_PASSWORD_ERROR | Invalid username/password. |
ERR-02082 | ERR_QP_USER_ALREADY_EXISTS | User (%s) already exists. |
ERR-02083 | ERR_QP_USER_SELF_DROP | You cannot drop yourself(%s). |
ERR-02084 | ERR_QP_USER_TABLE_EXIST | User drop error. This user's tables still exist. Drop those tables first. |
ERR-02085 | ERR_QP_USER_NO_ALTER_PRIV | The user(%s) does not have alter privileges. |
ERR-02086 | ERR_QP_USER_NO_CONNECT_PRIV | The user(%s) does not have connect privileges. |
ERR-02087 | ERR_QP_USER_NO_PRIV_TABLE_ACCESS | The user does not have access privileges on table(%s.%s). |
ERR-02088 | ERR_QP_ALTER_TABLE_NO_RIGHT | Error in altering table. Only the LOG table can be altered. |
ERR-02089 | ERR_QP_ALTER_TABLE_SAME_COLUMN_EXISTS | Error in altering table. Column name(%s) already exists. |
ERR-02090 | ERR_QP_ALTER_TABLE_MODIFY_TYPE | Error in altering table. Only varchar type can be modified. |
ERR-02091 | ERR_QP_ALTER_TABLE_MODIFY_VARCHAR_SIZE | Error in altering table. Varchar length should be greater than previous value length |
ERR-02092 | ERR_QP_ALTER_TABLE_DROP_BUILTIN_COLUMN | Error in altering table. Column (%s) cannot be dropped. |
ERR-02093 | ERR_QP_ALTER_TABLE_DROP_COLUMN_ON_INDEX | Error in altering table. Column (%s) having index cannot be dropped. |
ERR-02094 | ERR_QP_ALTER_TABLE_DUP_COLUMN | Error in altering table. Column (%s) already exists. |
ERR-02095 | ERR_QP_TRUNCATE_NON_LOG_TABLE | Error in truncating table. Only the LOG table can be truncated. |
ERR-02096 | ERR_QP_TABLE_TRUNCATE_NO_EXISTS | Error in truncating table. Table %s does not exist. |
ERR-02097 | ERR_QP_TABLE_DROP_COLUMN_LIMIT | Error in altering table. The table must have at least one column. |
ERR-02098 | ERR_QP_NOT_EQUJOIN | Error in joining tables. Only equi-join is allowed. |
ERR-02099 | ERR_QP_JOIN_OR | Error in joining tables. The OR condition for a join predicate is not allowed. |
ERR-02100 | ERR_QP_JOIN_FUNCTION_EXPR | Error in joining tables. The join predicate cannot use functions. |
ERR-02101 | ERR_QP_JOIN_PERMUTATION | Error in joining tables. Cannot join without join predicate. |
ERR-02104 | ERR_QP_COLLECTOR_NO_TEMPLATE_EXISTS | The template file (%s) does not exist. |
ERR-02105 | ERR_QP_COLLECTOR_TEMPLATE_FORMAT_INVALID | The template format (%s : %s : %d) is invalid. |
ERR-02109 | ERR_QP_JOIN_LOG_LOG | Cannot join two or more LOG tables. |
ERR-02110 | ERR_QP_KEYWD_MIN_LENGTH | Search condition argument is too short. It needs more than (%d) characters. |
ERR-02111 | ERR_QP_NO_SUCH_COMMAND | Invalid option. |
ERR-02112 | ERR_QP_NO_DISTINCT_GRBY | Cannot use DISTINCT with GROUP BY clause. |
ERR-02113 | ERR_QP_NO_DISTINCT_AGGR | Cannot use DISTINCT with aggregation function. |
ERR-02114 | ERR_QP_FUNCTION_DISTINCT | DISTINCT clause is not allowed here. |
ERR-02115 | ERR_QP_INVALID_COL_NAME | Internal column cannot be modified. |
ERR-02116 | ERR_QP_SEARCH_FILTER | Search predicate must use an index. |
ERR-02117 | ERR_QP_TABLE_NAME_INVALID | DDL on table (%s) is forbidden. |
ERR-02118 | ERR_QP_TABLE_LOCK_ALREADY_INIT | Lock object was already initialized. (Do not use select and append simultaneously in single session.) |
ERR-02119 | ERR_QP_NOT_IMPLEMENTED | This functionality has not been implemented. |
ERR-02120 | ERR_QP_SESSION_ID_INVALID | Invalid session ID (%s). |
ERR-02121 | ERR_QP_SESSION_PRIV_OF_KILL | No privileges to kill the session. |
ERR-02122 | ERR_QP_SESSION_PRIV_OF_CANCEL | No privileges to cancel the session. |
ERR-02123 | ERR_QP_NOT_EXIST_TABLE_ID_META | Table id (%lld) does not exist in meta database. |
ERR-02124 | ERR_QP_NOT_EXIST_COLUMN_ID_META | Column id (%llu) does not exist in table (%llu). |
ERR-02125 | ERR_QP_VARCHAR_TO_DATE_HEURISTIC | Error in converting string (%s) to datetime with heuristic method. Check the default date string format in this session. |
ERR-02126 | ERR_QP_NO_ORDERBY_SUBQ | ORDER BY clause is not allowed in a subquery |
ERR-02127 | ERR_QP_ORDERBY_TERMS | Only integer constants must be used for ORDER BY column position. |
ERR-02128 | ERR_QP_ORDERBY_OOR | ORDER BY column position %d is out of range - should be between 1 and %d. |
ERR-02129 | ERR_QP_GRBY_INT | GROUP BY terms must be integer constants |
ERR-02130 | ERR_QP_NO_GRBY_HAVING | A GROUP BY clause is required before HAVING |
ERR-02131 | ERR_QP_SUBQ_NOT_SINGLE | Single row error. Single-row subquery returns more than one row. |
ERR-02132 | ERR_QP_SUBQ_NOT_ALLOWED | Cannot use subquery on HAVING, ORDER BY and GROUP BY clauses. |
ERR-02133 | ERR_QP_INVALID_SUBQ | Invalid subquery. |
ERR-02134 | ERR_QP_REGEX_MAX_COUNT | Too many REGEXP in WHERE clause. No more than %d REGEXP in WHERE clause. |
ERR-02135 | ERR_QP_WHERE_TYPE | WHERE clause has to return a boolean result. |
ERR-02136 | ERR_QP_TBS_INVALID_TYPE | Invalid tablespace type. |
ERR-02137 | ERR_QP_TBS_TOO_MANY_DISKS | There are too many disks<%ud> for tablespace %s. |
ERR-02138 | ERR_QP_TBS_DISK_INVALID_PARALLEL_IO_VALUE | The PARALLEL_IO value<%d> for the disk<%s> must be higher than <%d>. |
ERR-02139 | ERR_QP_NO_MINMAX_ON_VARCHAR | MINMAX CACHE is not allowed for VARCHAR column(%s). |
ERR-02140 | ERR_QP_TABLE_NOT_SUPPORT_TABLESPACE | This type of tables do not support the tablespace functionality. |
ERR-02141 | ERR_QP_TYPE_COMPARE_NOT_APPLICABLE | Type comparison error. |
ERR-02142 | ERR_QP_NO_AGGR_LOB | Cannot use lob type in the GROUP BY clause. |
ERR-02143 | ERR_QP_NO_ORDER_LOB | Cannot use lob type in the ORDER BY clause. |
ERR-02144 | ERR_QP_OUTERJOIN_LIMIT | Outerjoin permits only 2 tables. |
ERR-02145 | ERR_QP_NOT_NUMBER_STRING | The string cannot be converted to number value.(%s) |
ERR-02146 | ERR_QP_TS_JOIN_LIMIT | Cannot join tables with timeseries function. |
ERR-02147 | ERR_QP_TS_VIEW_LIMIT | Cannot use inline view with timeseries function. |
ERR-02148 | ERR_QP_IPV6_FORMAT | Invalid IPv6 address format.(%s) |
ERR-02149 | ERR_QP_CONTAINS_TYPE_INVALID | Error in executing CONTAINS. Cannot convert from type(%d) to type(%d). |
ERR-02150 | ERR_QP_IP_NETWORK_TYPE_CLASS_MISMATCHED | Network type error. Network Mask length does not match with the column's length.(mask=%s, column=%s) |
ERR-02151 | ERR_QP_NO_MORE_DISK_FOR_EVALUATION | Error in adding disk to tablespace. You cannot use multiple disks for tablespace without valid license. |
ERR-02152 | ERR_QP_PARTITION_PROPERTY_NOT_COMPLETE | Error in setting column property. You should specify a positive value of column property PARTITION_PAGE_COUNT as well as PAGE_VALUE_COUNT. |
ERR-02153 | ERR_QP_UNKNOWN_COLUMN_PROPERTY | Invalid column property name (%s). Specify a valid property name. |
ERR-02154 | ERR_QP_SET_OP_NO_SELECT | Select set operator parsing error. |
ERR-02155 | ERR_QP_UNSURPPORTED_SET_OP | Only UNION ALL set operator is supported. |
ERR-02156 | ERR_QP_SET_OP_TARGET_MISMATCH | Set operator column types do not match at column (%d). |
ERR-02157 | ERR_QP_VALIDATE_INTERNAL | Internal error on validating query |
ERR-02158 | ERR_QP_INVALID_TYPE | Error in evaluating data type. You must specify a valid data type. |
ERR-02159 | ERR_QP_INVALID_BACKUP_RANGE | 'FROM DATETIME' must be earlier than 'TO DATETIME'. |
ERR-02160 | ERR_QP_UNMOUNT_NOT_MOUNTED_TABLE | Error in doing unmount table(%s). You can unmount only mounted tables. |
ERR-02161 | ERR_QP_NO_DDL_ON_MOUTE_MODE | Error in executing DDL. You cannot execute DDL with mounted DB. (*NOT USED*) |
ERR-02162 | ERR_QP_NO_UNMOUTE_DB | Error in doing unmount DB. You cannot umount database which is not mounted. |
ERR-02163 | ERR_QP_WRONG_RESTORE_PATH | Invalid directory path (%s). You should specify a valid path. |
ERR-02164 | ERR_QP_INVALID_ALTER_INDEX_PROPETY | Invalid index property. Property (%s) for index cannot be altered. |
ERR-02165 | ERR_QP_FUNCTION_POS | Function (%s) is not allowed here. |
ERR-02166 | ERR_QP_FUNCTION_ORDER_BY | Cannot use ORDER BY clause with aggregation function. |
ERR-02167 | ERR_QP_FUNCTION_GROUP_CONCAT_WRONG_SEPARATOR | GROUP_CONCAT function error. Separator should be a string constant. |
ERR-02168 | ERR_QP_OPERATOR_ARG_ERROR | Operator argument count or type does not match. |
ERR-02169 | ERR_QP_WRONG_COLUMN_PROPERTY_VALUE | Invalid column property value: (%s) |
ERR-02170 | ERR_QP_NO_ALIAS_IN_TABLE_INLINE_VIEW | Every specified table or inline view in FROM clause must have its own alias. |
ERR-02171 | ERR_QP_PRIMARY_KEY_DUPLICATE_PK_DECL | VOLATILE / LOOKUP / TRANSACTION table cannot have more than one primary key. |
ERR-02172 | ERR_QP_PRIMARY_KEY_INVALID_TABLE | Primary key is allowed only for VOLATILE / LOOKUP / TRANSACTION table. |
ERR-02173 | ERR_QP_VOLATILE_TABLE_INVALID_TYPE | Cannot create columns with data type (%s) in VOLATILE / LOOKUP table. |
ERR-02174 | ERR_QP_INDEX_TARGET_COLUMN_DUPLICATE | The index already exists in the column(%s). |
ERR-02175 | ERR_QP_VTABLE_UPDATE_INVALID_FORM | SET clause must be written as a list of 'column = value' expression. |
ERR-02176 | ERR_QP_VTABLE_UPDATE_TO_PRIMARY_KEY | Cannot update primary key column in SET clause. |
ERR-02177 | ERR_QP_VTABLE_UPDATE_NOT_IN_VOLATILE | ON DUPLICATE UPDATE clause is allowed only in LOOKUP / VOLATILE / TRANSACTION table. |
ERR-02178 | ERR_QP_TABLE_UPDATE_NO_COLUMN | Error in updating table. Column name (%s) does not exist in this table. |
ERR-02179 | ERR_QP_VTABLE_INSERT_WITHOUT_PRIMARY_KEY_VAL | INSERT on a %s table without primary key value cannot be proceeded. |
ERR-02180 | ERR_QP_VTABLE_UPDATE_ON_NO_PRIMARY_KEY | Primary key is mandatory for UPDATE. |
ERR-02181 | ERR_QP_INDEX_WITH_PRIMARY_KEY_PREFIX | Invalid index name starting with (%s) which is the same as primary key index. |
ERR-02182 | ERR_QP_PRIMARY_KEY_INDEX_DROP | You cannot drop the primary key index (%s). |
ERR-02183 | ERR_QP_APPEND_TO_VTABLE_UNSUPPORTED | Append mode for table (%s) is not supported. |
ERR-02184 | ERR_QP_PROPERTY_ON_INVALID_TABLE_TYPE | Specified property value is invalid in %s table. |
ERR-02185 | ERR_QP_MOUNT_DB_DUPLICATED | Invalid database name. This database name is already used for mount. |
ERR-02186 | ERR_QP_MOUNT_DB_INVALID | Invalid database name. |
ERR-02187 | ERR_QP_UNMOUNT_TABLE_IN_ACCESS | Error in unmounting database. Some tables in mounted database are accessed by other transactions |
ERR-02188 | ERR_QP_MOUNT_DB_NOT_FOUND | The database is not mounted. |
ERR-02189 | ERR_QP_DELETE_WHERE_INVALID_TABLE | Error in deleting rows. Only rows in VOLATILE / LOOKUP table can be deleted. |
ERR-02190 | ERR_QP_UPDATE_DELETE_WHERE_INVALID_CONDITION | Invalid UPDATE/DELETE condition. Specify it as (primary key column) = (value) |
ERR-02191 | ERR_QP_DELETE_WHERE_UNSUPPORTED | WHERE clause in DELETE statement is not supported yet. |
ERR-02192 | ERR_QP_KEYWORD_INDEX_TYPE | Index type for keyword index only supports keyword bitmap or keyword LSM. |
ERR-02195 | ERR_QP_BUFFER_OVERFLOW | Buffer size insufficient. |
ERR-02196 | ERR_QP_NO_FILE_TO_LOAD | Error in loading data. File (%s) does not exist. |
ERR-02197 | ERR_QP_LOAD_TABLE_ALREADY_EXISTS | Error in loading data with automatic mode. The table (%s) already exists. |
ERR-02198 | ERR_QP_LOAD_TABLE_NON_EXISTS | Error loading data. Table (%s) does not exist. |
ERR-02199 | ERR_QP_LOAD_TABLE_PARSING_ERROR | CSV parsing error on line %d: [%s]. |
ERR-02200 | ERR_QP_LOAD_TABLE_DELIMITOR_ERROR | [%s] is not a valid string terminator or enclosure. |
ERR-02201 | ERR_QP_LOAD_TABLE_UNKNOWN_AUTOMODE | The automatic loading mode is invalid. |
ERR-02202 | ERR_QP_LOAD_TABLE_HEADER_DETECT_ERROR | Automatic column detection failed because the data is empty or the headers are invalid. |
ERR-02203 | ERR_QP_LOAD_TABLE_UNKNOWN_ENCODINGMODE | Invalid encoding. |
ERR-02204 | ERR_QP_LOAD_TABLE_CHAR_CONVERSION_ERROR | Failed to convert %s to UTF8. |
ERR-02205 | ERR_QP_NO_SUPPORT_DOUBLE_MOD | A modulo operator can be applied only for integer types. |
ERR-02206 | ERR_QP_NO_SUPPORT_TBS_NON_AUTO | Tablespace name cannot be specified in non automode |
ERR-02207 | ERR_QP_SAVE_FILE_ALREADY_EXISTS | Error in saving table into file (%s). File already exists. |
ERR-02208 | ERR_QP_EXPR_TYPE | Expression argument type does not match. |
ERR-02221 | ERR_QP_NO_MANAGER_NAME_SETTED | Manager name is not specified. |
ERR-02222 | ERR_QP_RECEIVE_DIFF_PROTOCOL | Error in read protocol. Send %s protocol, but received %d protocol. |
ERR-02223 | ERR_QP_COLLECTORMANAGER_CONNECT | Unable to establish connection with collectormanager (%s). |
ERR-02224 | ERR_QP_NO_COLLECTOR_NAME_SETTED | Manager name is not specified. |
ERR-02225 | ERR_QP_SET_COLUMN_UNIT_ERROR | Invalid set column unit. |
ERR-02226 | ERR_QP_INVALID_CHARACTER | Invalid character ('%c'). |
ERR-02228 | ERR_QP_UNSUPPORT_PROCEDURE | Invalid procedure (%s). |
ERR-02229 | ERR_QP_INVALID_ARG_VALUE | Invalid argument value for function (%s). |
ERR-02230 | ERR_QP_PROCEDURE_WRONG_NUMBER_OF_ARGUMENTS | Wrong number of arguments in call to '%s'. |
ERR-02231 | ERR_QP_STRCPY_ERROR | strcpy function error (%d). |
ERR-02232 | ERR_QP_CALC_TYPE | Calculation argument type (%s), (%s) error. |
ERR-02233 | ERR_QP_INSERT_VALUE_LOCATION | Error occurred at column (%u): (%s) |
ERR-02234 | ERR_QP_SET_OP_COUNT | Set operator column counts do not match (%d and %d). |
ERR-02235 | ERR_QP_SERIES_BY | SERIES BY clause is not allowed here. |
ERR-02236 | ERR_QP_TOO_MANY_TABLES_IN_JOIN | For a table list in FROM clause, The number of tables should be less than 32. |
ERR-02237 | ERR_QP_INDEX_NOT_CREATED_ON_TABLE | The index <%s> is not an index for the table <%s>. |
ERR-02238 | ERR_QP_NO_JOIN_TYPE | This type of join is not allowed. |
ERR-02239 | ERR_QP_INVALID_USE_AGGR_FUNC | Invalid use of aggregation function. |
ERR-02240 | ERR_QP_INVALID_COLUMN_TYPE_FOR_FETCH | Cannot fetch column with type (%s). |
ERR-02241 | ERR_QP_UNSUPPORTED_JOIN_TABLES | Join between LOG table and fixed table is not supported in Cluster Edition. |
ERR-02242 | ERR_QP_EQUIJOIN_WITH_LOGTABLE_JOIN | Only equality predicates are supported when joining LOG tables in Cluster Edition. |
ERR-02243 | ERR_QP_UNSUPPORTED_ROW_BASED_DELETE | DELETE statement with the number of rows is not supported in Cluster Edition. |
ERR-02246 | ERR_QP_IDENTIFIER_TOO_LONG | Identifier %.*s is too long. |
ERR-02247 | ERR_QP_DATETIME_NOT_PROPER | DATETIME earlier than 1970-01-01 00:00:00 (UTC) is not valid. |
ERR-02248 | ERR_QP_INSUFFICIENT_COLUMN_DEF | Insufficient column definitions. |
ERR-02249 | ERR_QP_TABLE_DELETE_INVALID_COND | Invalid DELETE condition. |
ERR-02250 | ERR_QP_TAGDATA_COMPONENT_DDL_BLOCKED | You cannot execute DDL on compoment table/index of TAGDATA table explictly. |
ERR-02251 | ERR_QP_TAGDATA_DUPLICATE_FLAG | You cannot define columns with duplicate flag (%s) in TAGDATA table. |
ERR-02252 | ERR_QP_TAGDATA_INVALID_TYPE_FOR_FLAG | Invalid column type (%s) for flag (%s) in TAGDATA table. |
ERR-02253 | ERR_QP_TAGDATA_INSUFFICIENT_MANDATORY | Mandatory column definition (PRIMARY KEY / BASE TIME) is missing. |
ERR-02254 | ERR_QP_INVALID_TAGDATA_FLAG_ON_OTHER_TABLE | Column flag (%s) is only allowed for TAG table. |
ERR-02255 | ERR_QP_TAGDATA_INSERT_META_NO_PK | Primary key of TAGDATA table is not defined in metadata. |
ERR-02256 | ERR_QP_TAGDATA_INVALID_META_COLUMN_CLAUSE | Metadata column definition is allowed only in TAGDATA table. |
ERR-02257 | ERR_QP_TAGDATA_INSERT_META_INVALID_TYPE | Metadata insertion is allowed only in TAGDATA table. |
ERR-02258 | ERR_QP_TAGDATA_ALREADY_INSERTED | Metadata key (%.*s) for the TAG table has already been inserted. |
ERR-02259 | ERR_QP_TAGDATA_NOT_FOUND | Metadata of TAGDATA table is not found. (Key = %s) |
ERR-02260 | ERR_QP_TAGDATA_ALLOC_FAILURE | Failed to allocate new metadata of TAGDATA table (Current Size=%llu). |
ERR-02261 | ERR_QP_NO_TAGDATA_METADATA_INSERT_UPDATE | You cannot insert metadata into TAGDATA table with ON DUPLICATE KEY UPDATE clause. |
ERR-02262 | ERR_QP_TAGDATA_DIRECT_DML_BLOCKED | Direct DML on component tables of TAGDATA table is not allowed. |
ERR-02263 | ERR_QP_TAGDATA_MORE_TAGDATA_TABLE | You can create only one TAGDATA table. |
ERR-02264 | ERR_QP_TAGDATA_SCAN_OTHER_COLUMN_IN_ROLLUP | Cannot read a column (%s) in ROLLUP query because it is not a ROLLUP column. |
ERR-02265 | ERR_QP_TAGDATA_SCAN_WITHOUT_KEY_CONDITION | Reading TAGDATA table without primary key condition is not allowed. |
ERR-02266 | ERR_QP_TAGDATA_DELETE_RAW_CONDITION | You cannot delete raw data of TAGDATA table with WHERE condition. |
ERR-02267 | ERR_QP_TAGDATA_UNSUPPORTED_KEY_PREDICATE | Primary key in TAGDATA table should be compared by '=' or 'IN' operation. |
ERR-02268 | ERR_QP_TAGDATA_COMPARE_KEY_ONLY_CONSTANT | Primary key in TAGDATA table should be compared with constant value. |
ERR-02269 | ERR_QP_TAGDATA_OUTERJOIN | Outerjoin on TAGDATA table is not allowed. |
ERR-02270 | ERR_QP_TAGDATA_NAME_VIOLATION | TAGDATA table's name should be 'TAG'. |
ERR-02271 | ERR_QP_TAGDATA_NOT_CONSTANT_PK_VALUE | You must insert key value of TAGDATA table as constant. |
ERR-02272 | ERR_QP_NOT_EXIST_INDEX_ID_META | Index id (%llu) does not exist in meta database. |
ERR-02273 | ERR_QP_TAGDATA_USER_NO_PRIV_DDL | The user does not have privileges on TAGDATA DDL. |
ERR-02274 | ERR_QP_TAGDATA_FREE_FAILURE | Failed to free new metadata of TAGDATA table. |
ERR-02275 | ERR_QP_TAGDATA_INSERT_SELECT_IN_EE | The INSERT SELECT statement to the TAGDATA table is not allowed in enterprise edition. |
ERR-02276 | ERR_QP_TAGDATA_COMPONENT_EXISTS | Component table (%s) of TAGDATA table already exists. |
ERR-02277 | ERR_QP_TAGDATA_COMPONENT_NAME_RESERVED | Table or index name that starts with '_TAG' is reserved. |
ERR-02278 | ERR_QP_UPDATE_INVALID_TABLE_TYPE | UPDATE statement is not allowed for %s. |
ERR-02279 | ERR_QP_TAGDATA_INVALID_PRIMARY_NAME | Invalid tag name insertion to TAGDATA table (name = '%s'). |
ERR-02280 | ERR_QP_TAGDATA_INVALID_BIND_TAGNAME | Invalid tag name insertion due to wrong bind variable. |
ERR-02281 | ERR_QP_DURATION_NOT_APPLICABLE | DURATION clause is not applicable on %s. |
ERR-02282 | ERR_QP_DELETE_ALREADY_DOING | The DELETE statement for table '%s' is already been executed. |
ERR-02283 | ERR_QP_TAGDATA_IN_SUBQUERY_NOT_ALLOWED | IN subquery on TAGDATA table is not allowed. |
ERR-02284 | ERR_QP_INTERNAL_NULL_EXIST | Internal NULL value exists in the condition expression. |
ERR-02285 | ERR_QP_INTERNAL_ERROR | Internal error: %s. |
ERR-02286 | ERR_QP_KV_TABLE_MEMORY_ALLOC | Memory allocation failed while creating TAGDATA table. You may need to decrease TAG_DATA_PART_SIZE in machbase.conf. |
ERR-02287 | ERR_QP_TAGDATA_NAME_TRUNCATED | TAGDATA name value (%s) is too long. |
ERR-02288 | ERR_QP_AGGR_EXPECTED | Aggregate function is expected at (%.*s). |
ERR-02289 | ERR_QP_NON_CONST | Non-constant expression is not allowed for PIVOT values. |
ERR-02290 | ERR_QP_CANNOT_ALTER | %s cannot be altered. |
ERR-02291 | ERR_QP_INVALID_TABLE_NAME_TAG | Table name 'TAG' must be used for TAGDATA table. |
ERR-02292 | ERR_QP_TAGDATA_INVALID_CONSTRAINT_ORDER | The order of columns in TAGDATA table must be (PRIMARY, BASE TIME, SUMMARIZED, other columns, .. ). |
ERR-02293 | ERR_QP_NO_BIND_PARAM_COLUMN | Column meta for bind param[%d] is not available. |
ERR-02294 | ERR_QP_TAGDATA_JOIN | Joining more than one TAGDATA table is not supported. |
ERR-02295 | ERR_QP_INVALID_ORDINAL_NUMBER | Invalid ordinal number ID_COLUMN (%lld) and TIME_COLUMN (%lld). |
ERR-02296 | ERR_QP_INTERPOLATION_ONE_BETWEEN | Interpolation requires only one BETWEEN expression. |
ERR-02297 | ERR_QP_BETWEEN_HAS_INVALID_EXPR | BETWEEN has invalid expression (%s). |
ERR-02298 | ERR_QP_NOT_FACTOR_OF_INTERPOLATION_INTERVAL | FREQUENCE must be a factor of INTERPOLATION_INTERVAL (%lld). |
ERR-02299 | ERR_QP_ONLY_BETWEEN_SUPPORTED | Only BETWEEN condition is supported. |
ERR-02300 | ERR_QP_INSUFFICIENT_COLUMN_FOR_INTERPOLATION | Interpolation column is missing. (%s) |
ERR-02301 | ERR_QP_INSUFFICIENT_PROPERTIES_FOR_INTERPOLATION | Some properties are missing for interpolation. |
ERR-02302 | ERR_QP_INVALID_INTERVAL_INTERPOLATION_PROPERTY | Invalid interpolation interval property: %lld. |
ERR-02303 | ERR_QP_INVALID_ROLLUP_UNIT | You must use higher ROLLUP unit. |
ERR-02304 | ERR_QP_INTERPOLATION_VIEW_LIMIT | Interpolation is not applicable on (%s). |
ERR-02305 | ERR_QP_INTERPOLATION_ONE_TARGET | JOIN is not applicable for interpolation. |
ERR-02306 | ERR_QP_CHEKPOINT_INVALID_SIZE | Interpolation interval value(%lld) should be less than checkpoint interval value(%lld). |
ERR-02307 | ERR_QP_ROLLUPUNIT_INTERVALVALUE | Interpolation interval value(%lld) should be less than ROLLUP unit (%s). |
ERR-02308 | ERR_QP_ROLLUPUNIT_CHECKPOINTVALUE | Checkpoint interval value(%lld) should be less than ROLLUP unit (%s). |
ERR-02309 | ERR_QP_INVALID_INTERPOLATION_DIVIDE | Checkpoint interval value(%lld) should be divide by interpolation value(%lld). |
ERR-02310 | ERR_QP_INVALID_CHECKPOINT_INTERPOLATION_PROPERTY | Invalid interpolation checkpoint property: %lld. |
ERR-02311 | ERR_QP_INVALID_KEYWORD_INTERPOLATION | %s cannot be used in interpolation query. |
ERR-02312 | ERR_QP_NOT_INTERPOLATION_TABLE | Rollup delete can only be done on the Interpolation Tag table. |
ERR-02313 | ERR_QP_ROLLUP_REBUILD_RANGE_ERROR | Unable to execute ROLLUP DELETE with the given range. |
ERR-02314 | ERR_QP_TAG_UNSUPPORT_DURATION_BACKUP | Regular duration backup does not support a backup of the TAG table (Try incremental backup which permits the action on the TAG table). |
ERR-02315 | ERR_QP_FOG_SNAPSHOT_NOT_SUPPORTED | Snapshot is not supported. |
ERR-02316 | ERR_QP_INVALID_EXPR_IN_DURATION | Invalid expression in DURATION clause: %.*s |
ERR-02317 | ERR_QP_FUNCTION_EXECUTION | Function execution failed: %s |
ERR-02318 | ERR_QP_LOOKUP_NODE_CONNECT_FAIL | Cannot connect to the lookup node. |
ERR-02319 | ERR_QP_LOOKUP_NODE_ERROR | Error on Lookup Node |
ERR-02320 | ERR_QP_LOOKUP_NODE_PENDING | Lookup Node is not ready |
ERR-02321 | ERR_QP_LOOKUP_NODE_NIL | No data was found in the lookup node. |
ERR-02322 | ERR_QP_LOOKUP_TABLE_MISSING_PRIMARY_KEY | Mandatory column definition (PRIMARY KEY) is missing. |
ERR-02323 | ERR_QP_EXEC_FUNCTION_NOT_SUPPORTED_TABLE_TYPE | EXEC %s is not supported for %s table type. |
ERR-02324 | ERR_QP_USED_TAG_ID_DATA | Cannot delete tagmeta. there exist data with deleted_tag key. |
ERR-02325 | ERR_QP_INTEGER_OVERFLOW | Integer %s type overflow. |
ERR-02326 | ERR_QP_EDGE_BACKUP_MOUNT_NOT_SUPPORTED | Backup/Mount is not supported. |
ERR-02327 | ERR_QP_PIVOT_IN_ROLLUP_NOT_SUPPORTED | Pivot is not supported in rollup query. |
ERR-02328 | ERR_QP_TAGMETA_INSERT_COUNT_EXCEEDED | Cannot insert a new tag since the number of tags has exceeded MAX_TAG_COUNT(%lld). |
ERR-02329 | ERR_QP_TAGMETA_INSERT_COUNT_EXCEEDED_LIMIT | Cannot insert a new tag since the number of tags has exceeded TAG_COUNT_LIMIT(%lld). |
ERR-02330 | ERR_QP_KV_INSUFFICIENT_MANDATORY | Mandatory column definition (ULONG / DATETIME) is missing. |
ERR-02331 | ERR_QP_RANGE_EXPR | RANGE expression is not applicable on the table (%s). |
ERR-02332 | ERR_QP_UNABLE_CREATE_INDEX_ON_COLUMN | Unable to create an index on the column (%s). |
ERR-02333 | ERR_QP_KV_TABLE_PREDICATE_MAX_OVER | Column (%s) cannot exceed %d. |
ERR-02334 | ERR_QP_TAG_INDEX_NOT_YET_SUPPORTED | Tag Index is not yet supported. |
ERR-02335 | ERR_QP_FAILED_TO_DELETE_ALL | Failed to delete all on this table. It is recommended to use EXEC TABLE_REFRESH(%s). |
ERR-02336 | ERR_QP_CASCADE_ONLY_TAG_TABLE | CASCADE option is not applicable on %s. |
ERR-02337 | ERR_QP_TAGMETA_DUPLICATE_FLAG | Unable to define more than one column attribute (%s). |
ERR-02339 | ERR_QP_TAGMETA_DIFFERENT_SUMMARY_TYPE | The type of %s column (%s) is different from that of VALUE column (%s). |
ERR-02340 | ERR_QP_TAGMETA_NOT_FOUND_SUMMARY_VALUE | SUMMARIZED column does not exist for %s. |
ERR-02341 | ERR_QP_SUMMARY_GREATER_THAN_USL | SUMMARIZED value is greater than UPPER LIMIT. |
ERR-02342 | ERR_QP_SUMMARY_LESS_THAN_LSL | SUMMARIZED value is less than LOWER LIMIT. |
ERR-02343 | ERR_QP_LSL_GREATER_THAN_USL | LOWER LIMIT must not be greater than UPPER LIMIT. |
ERR-02344 | ERR_QP_NOT_NUMERIC_TYPE | Not numeric type. (%s) |
ERR-02345 | ERR_QP_INVALID_TAGMETA_FLAG_ON_OTHER_TABLE | Column flag (%s) is only allowed for TAGMETA table. |
ERR-02346 | ERR_QP_DEFAULT_ONLY_FOR_TYPE_DATETIME | Column type (%s) is not allowed for default value. |
ERR-02347 | ERR_QP_DEFAULT_ONLY_FOR_FLAG_SYSDATE | SYSDATE is only allowed for default value. |
ERR-02348 | ERR_QP_ALTER_SET_PROP_NOT_SUPPORT_ON_CLUSTER | Alter table set %s not support on cluster. |
ERR-02349 | ERR_QP_BIND_VARIABLE_NOT_SUPPORTED_NEW_TAG | Bind variable is not supported for new tag. |
ERR-02350 | ERR_QP_WINDOW_FUNCTION_OVER_EXISTS | The function (%s) requires OVER clause. |
ERR-02351 | ERR_QP_NO_WINDOW_CONTEXT | Window function is allowed only in SELECT list. |
ERR-02352 | ERR_QP_FUNCTION_OVER | OVER clause is not applicable on (%s). |
ERR-02353 | ERR_QP_OVER_INVALID_TYPE | Invalid data type (%s) in OVER clause. |
ERR-02354 | ERR_QP_OVER_CONSTANT | Constant is not allowed in OVER clause. |
ERR-02355 | ERR_QP_TYPE_UNSUPPORTED | Type (%s) is not supported. |
ERR-02356 | ERR_QP_FIRST_DAY_OF_THE_MONTH | Origin must be the first day of the month. |
ERR-02357 | ERR_QP_JOIN_NOT_APPLICABLE | JOIN is not applicable on the table (%s). |
ERR-02358 | ERR_QP_INVALID_METADATA_ALTER_TABLE | When altering a table, the METADATA keyword is only applied to the tag table. |
ERR-02359 | ERR_QP_TAG_TABLE_ONLY_META_CHANGE | Tag table (%s) can only be modified in the metadata area. |
ERR-02360 | ERR_QP_WINDOW_FUNCTION_NOT_ALLOWED | Window function is not allowed with %s. |
ERR-02361 | ERR_QP_TABLE_STRUCTURE_MODIFIED | Table (%d) structure was modified. |
ERR-02362 | ERR_QP_STATEMENT_NOT_SUPPORTED | This statement is not supported. |
ERR-02600 | ERR_QP_WRONG_SEQUENCE_TABLE_TYPE | SEQUENCE property is not applicable in the table. |
ERR-02601 | ERR_QP_INVALID_FUNCTION_IN_SEQUENCE_COLUMN | Invalid function in a SEQUENCE column. NEXTVAL must be used. |
ERR-02602 | ERR_QP_INVALID_NEXTVAL_FUNCTION_QUERY | NEXTVAL is applicable only in INSERT statement. |
ERR-02603 | ERR_QP_INVALID_COLUMN_NEXTVAL | NEXTVAL is applicable only in SEQUENCE columns. |
ERR-02604 | ERR_QP_INVALID_SEQUENCE_COLUMN_DATA_TYPE | Sequence column must be LONG type. |
ERR-02651 | ERR_QP_EXIST_DEPENDENT_ROLLUP_TABLE | Dependent ROLLUP (%s) exists. |
ERR-02652 | ERR_QP_NOT_ROLLUP_TABLE | Not a ROLLUP table. (%s) |
ERR-02653 | ERR_QP_ROLLUP_INTERVAL_GREATER_THAN_SRC_ROLLUP | Rollup interval must be greater than source rollup interval. |
ERR-02654 | ERR_QP_ROLLUP_NOT_FOUND | ROLLUP (%s) is not found. |
ERR-02655 | ERR_QP_ROLLUP_INTERVAL_DIVIDE_REMAINDER_ZERO | Rollup interval source rollup interval Must Divide Zero. |
ERR-02656 | ERR_QP_ROLLUP_INTERVAL_POSITIVE_INTEGER | Rollup interval must positive integer. |
ERR-02657 | ERR_QP_ROLLUP_INTERVAL_SMALLER_THAN_YEAR | Rollup interval must be smaller than year. |
ERR-02658 | ERR_QP_ROLLUP_NOT_ENABLE | ROLLUP is not enabled for %s. |
ERR-02659 | ERR_QP_ROLLUP_MAX_COUNT | Rollup maximum count is 100. |
ERR-02670 | ERR_QP_ROLLUP_SOURCE_USERID | Rollup user ID(%d) is not equal to Source user ID(%d) |
ERR-02671 | ERR_QP_ROLLUP_COLUMN_INVALID_TYPE | Invalid type for ROLLUP column (%s). |
ERR-02672 | ERR_QP_ROLLUP_JSON_PATH_NOT_EXISTS | Json path is not specified on %s. |
ERR-02673 | ERR_QP_ROLLUP_JSON_PATH_EXISTS | Json path is not applicable on %s. |
ERR-02674 | ERR_QP_ROLLUP_NOT_FOUND_COLUMN | ROLLUP query must have a target column. |
ERR-02675 | ERR_QP_CAN_SCAN_ONE_ROLLUP_COLUMN | Cannot use more than one ROLLUP column in a ROLLUP query. |
ERR-02676 | ERR_QP_NOT_TAG_TABLE | Not a TAG table. |
ERR-02677 | ERR_QP_INVALID_ROLLUP_TIME_UNIT | Invalid rollup time unit (%s). |
ERR-02678 | ERR_QP_NEED_SUMMARIZED_COLUMN | WITH ROLLUP requires a SUMMARIZED column. |
ERR-02679 | ERR_QP_AUTO_GENERATE_ROLLUP_FAIL | Failed to create ROLLUP by WITH ROLLUP option. |
ERR-02680 | ERR_QP_PROCESS_ALREADY_START | PROCESS %s (%s) is already started. |
ERR-02681 | ERR_QP_PROCESS_ALREADY_STOP | PROCESS %s (%s) is already stopped. |
ERR-02682 | ERR_QP_ROLLUP_EXT_TYPE_DIFFER | ROLLUP extension type is different. |
ERR-02683 | ERR_QP_TAGDATA_SCAN_OTHER_TIME_COLUMN_IN_ROLLUP | Cannot read a column (%s) in ROLLUP query because it is not a ROLLUP time column. |
ERR-02684 | ERR_QP_NOT_EXIST_DEPENDENT_ROLLUP_TABLE | Dependent ROLLUP table does not exist. |
ERR-02685 | ERR_QP_NO_APPLICABLE_ROLLUP_TABLE | There are no applicable ROLLUP tables. |
ERR-02686 | ERR_QP_RENAME_NO_APPLICABLE_ROLLUP_TABLE | The names of column(%s) associated with ROLLUP cannot be changed. |
ERR-02687 | ERR_QP_ROLLUP_WAKEUP_INTERVAL_SMALLER_THAN_SRC_ROLLUP | Rollup wakeup interval must be same or smaller than rollup interval. |
ERR-02688 | ERR_QP_ROLLUP_WAKEUP_INTERVAL_DIVIDE_REMAINDER_ZERO | Rollup wakeup interval must exactly divide the rollup interval. |
ERR-02689 | ERR_QP_CUSTOM_ROLLUP_FROM_ALIAS_NOT_ALLOWED | Cannot use alias in custom ROLLUP SELECT FROM clause. |
ERR-02690 | ERR_QP_CUSTOM_ROLLUP_OWNER_MISMATCH | Custom ROLLUP source and destination table owners must be same. (source:%s, destination:%s) |
ERR-02691 | ERR_QP_INDEX_TABLE_OWNER_MISMATCH | Index owner and table owner must be same. (index owner:%s, table owner:%s) |
ERR-02692 | ERR_QP_CIRCULAR_VIEW_DEFINITION | Circular view definition is not allowed: (%s). |
ERR-02700 | ERR_QP_DUPLICATE_RETENTION | Policy (%s) already exists. |
ERR-02701 | ERR_QP_NOT_EXISTS_RETENTION | Policy (%s) does not exist. |
ERR-02702 | ERR_QP_EXIST_DEPENDENT_RETENTION_TABLE | Policy (%s) is in use. |
ERR-02703 | ERR_QP_NOT_EXISTS_RETENTIONJOB | Table (%s) has no retention policy. |
ERR-02704 | ERR_QP_DUPLICATE_RETENTIONJOB | Table (%s) already has a retention policy. |
ERR-02705 | ERR_QP_RETENTION_DURATION_RANGE | Retention duration must be longer than 1 day. |
ERR-02706 | ERR_QP_RETENTION_INTERVAL_RANGE | Retention interval must be longer than 1 hour. |
ERR-02707 | ERR_QP_RETENTION_TABLE_TYPE | Retention is not applicable on the table (%s). |
ERR-02708 | ERR_QP_RETENTION_PRIVILEGE | Only SYS user can create or drop RETENTION. |
ERR-02813 | ERR_QP_INVALID_ROLLUP_EXPR | Invalid ROLLUP expression. (Token = %s, Unit = %ld) |
ERR-02814 | ERR_QP_INVALID_ROLLUP_TARGET | Invalid ROLLUP target. BASETIME column of TAGDATA table is the only target. |
ERR-02815 | ERR_QP_DIFFERENT_ROLLUP_EXPR | Different ROLLUP expressions are used in a single SELECT query. |
ERR-02816 | ERR_QP_INVALID_USE_IN_ROLLUP | Only rollup column with aggregate function can be referenced in ROLLUP SELECT query. |
ERR-02817 | ERR_QP_INVALID_ROLLUP_NOT_SELECT | ROLLUP expression must be used in SELECT query. |
ERR-02818 | ERR_QP_UNSUPPORT_ROLLUP_TARGET | Invalid ROLLUP target (%s). |
ERR-02819 | ERR_QP_ROLLUP_RUNNING | ROLLUP thread is running. |
ERR-02820 | ERR_QP_ROLLUP_NOT_RUNNING | ROLLUP thread is not running. |
ERR-02821 | ERR_QP_OPERATION_IN_PROGRESS | Another DDL/DELETE/SNAPSHOT is in progress. |
ERR-02822 | ERR_QP_INVALID_EXPRESSION_IN_ROLLUP_QUERY | Invalid expression in ROLLUP query : %.*s |
ERR-02823 | ERR_QP_ROLLUP_SELECT_FROM | Invalid table in ROLLUP query: %s |
ERR-02824 | ERR_QP_CUSTOM_ROLLUP_FIRST_COLUMN_NOT_TAGNAME | In custom ROLLUP SELECT, first column must be TAG key column (%s). |
ERR-02825 | ERR_QP_INVALID_EXTENDED_COLUMN_ROLLUP_QUERY | Extended column(%s) cannot be used in ROLLUP query. |
ERR-02826 | ERR_QP_CANT_REVOKE | User (%s) can't revoke from table (%s.%s). |
ERR-02827 | ERR_QP_USER_NO_GRANT_PRIV | User does not have grant privileges. |
ERR-02828 | ERR_QP_USER_NO_REVOKE_PRIV | User does not have revoke privileges. |
ERR-02829 | ERR_QP_USER_ONLY_SYS_CAN_DO_CREATE_DROP | Only SYS user can create or drop user. |
ERR-02830 | ERR_QP_USER_NO_PRIV_TABLE_FOR_EACH_CASE | The user does not have (%s) privilege on table(%s.%s). |
ERR-02831 | ERR_QP_USER_NO_GRANT_UPDATE_PRIV_FOR_LOG_TABLE | You can't grant UPDATE privilege on Log Table. |
ERR-02832 | ERR_QP_USER_NO_REVOKE_UPDATE_PRIV_FOR_LOG_TABLE | You can't revoke UPDATE privilege on Log Table. |
ERR-02833 | ERR_QP_USER_SELECT_ONLY_FOR_MOUNT_TABLE | You can only grant SELECT privileges on Mounted database. |
ERR-02834 | ERR_QP_PASSWORD_REUSED | Cannot use new password as previously used. |
ERR-02835 | ERR_QP_USER_NO_PRIV_DATABASE_FOR_EACH_CASE | The user does not have (%s) privilege on database(%s). |
ERR-02837 | ERR_QP_CUSTOM_ROLLUP_NOT_SUPPORTED_IN_CLUSTER | Custom rollup is not supported in cluster edition. |
ERR-02838 | ERR_QP_USER_NO_MOUNT_PRIV | The user(%s) does not have mount privileges. |
ERR-02839 | ERR_QP_DATABASE_NOT_FOUND | Database (%s) does not exist. |
ERR-02840 | ERR_QP_DATABASE_NOT_ACTIVE | Database (%s) is not an active database. |
ERR-02841 | ERR_QP_DATABASE_USE_IN_TRANSACTION | Cannot change the current database while a transaction is active. |
ERR-02842 | ERR_QP_DATABASE_ALREADY_EXISTS | Database (%s) already exists. |
ERR-02843 | ERR_QP_DATABASE_SELF_DROP | Cannot drop current database (%s). |
ERR-02844 | ERR_QP_DATABASE_DEFAULT_DROP | Default database (%s) cannot be dropped. |
ERR-02845 | ERR_QP_DATABASE_READ_ONLY | Database (%s) is read only. |
ERR-02846 | ERR_QP_DATABASE_RESERVED_NAME | Database name (%s) is reserved and cannot be used. |
ERR-02847 | ERR_QP_PREPARED_CATALOG_CHANGED | Prepared statement target database (%s) changed. |
ERR-03000–ERR-03999 (65)
| コード | シンボル | メッセージ原文 |
|---|---|---|
ERR-03000 | MMP_STMT_OVERFLOWS | Statement ID overflow (Limit = %u, Curr = %u). |
ERR-03001 | MMP_STMT_QUERY_ZERO | Statement query length is zero. |
ERR-03002 | MMT_TASK_POOL_INITIALIZE_ERROR | Task pool initialization error. |
ERR-03003 | MMS_STMT_POOL_INITIALIZE_ERROR | Statement pool initialization error. |
ERR-03004 | MMT_QUEUE_CREATE_ERROR | Queue creation error. |
ERR-03005 | MMS_STMT_ALLOC_ERROR | Statement allocation error. |
ERR-03006 | MMP_META_UNKNOWN_TYPE_ERROR | Unknown meta type error (typecode is %u). Internal error. |
ERR-03007 | MMP_PROTOCOL_BUFFER_INSUFFICIENT | Insufficient protocol buffer size. Increase it. |
ERR-03008 | MMP_PROTOCOL_STATE_INVALID | Invalid protocol state. Check your application again. (Protocol = %s, State = %s) |
ERR-03009 | MMP_EXECUTE_PROTOCOL_DATA_INVALID | Invalid execute protocol data (%s). |
ERR-03010 | MMS_FETCH_PROTOCOL_INSUFFICIENT | Error in fetch protocol: not enough buffer size to execute it. Increase the size. |
ERR-03011 | MMP_SEND_ERROR | Send error. |
ERR-03012 | MMP_MEMORY_ALLOC_ERROR | Memory allocation error. |
ERR-03013 | MMP_STMT_APPEND_TABLE_ZERO | Invalid table name for append table. Table name is omitted. |
ERR-03014 | MMP_APPEND_PROTOCOL_DATA_INVALID | Invalid append protocol data (%s). |
ERR-03015 | MMP_STMT_APPEND_NO_ENDIAN | Endian is not specified for append. Check endian information. |
ERR-03016 | MMP_STMT_APPEND_MAX_COLUMN | Too many columns are specified for append. Cannot append more than %d columns |
ERR-03017 | MMP_STMT_APPEND_MAX_RECORD_SIZE | Too large record size for append. Cannot append more than %d bytes per record. |
ERR-03018 | MMP_STMT_APPEND_MAX_BLOCK_SIZE | The specified maximum block size (%d) was exceeded. Check the application's append data structure. |
ERR-03019 | MMP_STMT_EXPLAIN_PLAN_ERROR | Explain plan error. Use it for SELECT statement only. |
ERR-03020 | MMP_STMT_EXPLAIN_ONLY_DIRECT_EXECUTE | Explain plan is not allowed in prepared mode. |
ERR-03021 | MMP_CONNECT_VERSION_MISMATCHED | Protocol versions do not match: server (%d.%d.%d), client (%d.%d.%d). |
ERR-03022 | MMP_OS_GET_HANDLE_LIMIT_ERROR | Failed to get handle limit from the system. |
ERR-03023 | MMP_OS_CHECK_HANDLE_LIMIT_ERROR | Handle limit(%d) from the system is less than that of property(%d). Tune system handle limit or decrease the property 'HANDLE_LIMIT' |
ERR-03024 | ERR_MM_SESSION_ID_NOT_FOUND | Invalid session ID (%llu). |
ERR-03025 | ERR_MM_SESSION_SELF_OP_ERROR | Not enough privileges to manipulate the session. (%llu) |
ERR-03026 | ERR_MM_SESSION_DIFF_USER_CANCEL | You should log in with the same user name in the target session. Now (%d) Target(%d) |
ERR-03027 | ERR_MM_SESSION_CANCELLED | This statement has been canceled. |
ERR-03028 | ERR_MM_NO_SESSION_PROPETY | Invalid session property name. Name (%s) does not exist. |
ERR-03029 | ERR_MM_SESSION_PROPETY_CONVERT | Error in converting session property (%s). Cannot convert string (%s) to integer. |
ERR-03030 | ERR_MM_SESSION_PROPETY_VALUE_RANGE | Invalid session property value. Check the session value (%s) |
ERR-03031 | ERR_MM_PROTOCOL_BROKEN | Protocol error. |
ERR-03032 | ERR_MM_LICENSE_NO_META | Error in getting license meta. Check DB image and binary. |
ERR-03033 | ERR_MM_LICENSE_OPEN_META | Error in opening meta. |
ERR-03034 | ERR_MM_LICENSE_EXEC_META | Error in executing meta. |
ERR-03035 | ERR_MM_LICENSE_CLOSE_META | Error in closing meta. |
ERR-03036 | ERR_MM_LICENSE_EXPIRED | The license is expired(%s). |
ERR-03037 | ERR_MM_LICENSE_INVALID | The license is invalid or the license file does not exist(%s). |
ERR-03038 | ERR_MM_LICENSE_VIOLATION | License violation detected (%s). contact sales@machbase.com |
ERR-03039 | ERR_MM_SESSION_COUNT_EXCEED | Session count exceeded the maximum (%llu). |
ERR-03040 | ERR_MM_SHUTDOWN_FAIL | Unable to shutdown since the server is busy. |
ERR-03041 | ERR_MM_APPEND_BATCH | AppendBatch error: %s. |
ERR-03042 | ERR_MM_RECOVERY_BEGUN | Recovery in progress. |
ERR-03043 | ERR_MM_EXECARRAY_NOT_FOR_SELECT | Array Execute is not applicable for SELECT query. |
ERR-03044 | MMP_CONNECT_WRONG_TIMEZONE | Invalid TIMEZONE string: %s. |
ERR-03045 | ERR_MM_INVALID_CONTEXT | Invalid context at %s. |
ERR-03046 | ERR_MM_CM_ERROR | Communication module error (rc=%d): [%s]. |
ERR-03047 | ERR_MM_FUNCTION | Failed to call function %s (rc=%d) |
ERR-03048 | ERR_MM_PREPARED_STMT_USER_CHANGED | Prepared statement cannot be used after CONNECT USER. |
ERR-03200 | ERR_MM_SERVER_NOT_RUNNING | Server is not running. |
ERR-03201 | ERR_MM_INVALID_STMT_STATE | Invalid statement state: (%d) |
ERR-03202 | ERR_MM_COLUMN_RANGE | Column index is out of range. |
ERR-03203 | ERR_MM_BUFFER_SIZE_EXCEEDED | The data length exceeded the buffer size. |
ERR-03204 | ERR_MM_APPEND_PARAM_IP_STRING_NULL | Append data ip string is null. |
ERR-03205 | ERR_MM_APPEND_PARAM_DATETIME_STRING_NULL | Append data datetime string(%s) is null. |
ERR-03206 | ERR_MM_INVALID_COLUMN_TYPE | Invalid column type (%d). |
ERR-03207 | ERR_MM_INVALID_STMT_TYPE | Invalid statement type (%d). |
ERR-03208 | ERR_MM_SERVER_THREAD_ERR | Server thread error: %d - %s |
ERR-03209 | ERR_MM_BUSY_STMT_STATE | statement is busy. (%d) |
ERR-03210 | ERR_MM_CONN_INVALID_STATE | This connection already has been already disconnected |
ERR-03211 | ERR_MM_DB_EXIST | Database already exists. |
ERR-03212 | ERR_MM_DB_NOT_EXIST | Database does not exist. |
ERR-03213 | ERR_MM_SERVER_RUNNING | Server is running. |
ERR-03214 | ERR_MM_DBS_OPEN_FAIL | Failed to open dbs(%s) directory. |
ERR-03215 | ERR_MM_ALTER_SESSION | ALTER SESSION statement is not supported. |
ERR-04000–ERR-04999 (23)
| コード | シンボル | メッセージ原文 |
|---|---|---|
ERR-04000 | CMI_PROTOCOL_MSG_ERROR_IN_CONNECTION | Protocol message error in connection. |
ERR-04001 | CMI_PROTOCOL_LENGTH_ERROR_IN_CONNECTION | Protocol length error in connection (%llu but %llu). |
ERR-04002 | CMI_DOUBLE_CREATE_COMMUNICATION_CHANNEL | Cannot create duplicate communication channels. |
ERR-04003 | CMI_SOCKET_CREATION_ERROR | Socket creation error (%d). |
ERR-04004 | CMI_BIND_ERROR | Socket bind error. Errorcode is (%d) |
ERR-04005 | CMI_LISTEN_ERROR | Listen error (%d). |
ERR-04006 | CMI_POLL_CREATION_ERROR | Poll creation error (%d). |
ERR-04007 | CMI_POLL_ADD_ERROR | Poll add error (%d). |
ERR-04008 | CMI_CONNECTION_ERROR | Creation error (%d). |
ERR-04009 | CMI_SEND_ERROR | Send error (%d). |
ERR-04010 | CMI_RECV_ERROR | Receive error (%d). |
ERR-04011 | CMI_DISPATCH_ERROR | Dispatch error (%d). |
ERR-04012 | CMI_SETSOCKOPT_ERROR | nbp_sock_set_opt() error (%d). |
ERR-04013 | CMI_RECV_RETRY_ERROR | Failed to receive accept data repeatedly in %u milliseconds. |
ERR-04014 | CMI_MEMORY_ALLOC_ERROR | Memory allocation error. |
ERR-04015 | CMI_INVALID_PROTOCOL_ERROR | Receive invalid protocol (%d). |
ERR-04016 | CMI_TIMEDOUT_ERROR | Communication timed out error. (%d) |
ERR-04017 | CMI_SOCKET_CLOSED | Remote socket closed. |
ERR-04018 | CMI_INVALID_BIND_IP_ADDR | BIND_IP_ADDRESS [%s] is invalid |
ERR-04019 | CMI_BIND_ADDR_NOT_AVAILABLE | BIND_IP_ADDRESS [%s] is not available. Errorcode is[%d] |
ERR-04020 | CMI_BIND_PORT_INUSE | Port[%d] is already in use. Errorcode is [%d] |
ERR-04021 | CMI_OS_NOT_SUPPORT_FUNCTION | Function[%s] is not supported in this OS[%s] |
ERR-04999 | ERR_QP_ROLLUP_NOT_SUPPORTED_ON_DISTANCE_AXIS | ROLLUP is not supported on DISTANCE axis TAG table. |
ERR-05000–ERR-05999 (1)
| コード | シンボル | メッセージ原文 |
|---|---|---|
ERR-05002 | AD_MANAGER_GENERATE_ERROR | msg does not used |
ERR-06000–ERR-06999 (35)
| コード | シンボル | メッセージ原文 |
|---|---|---|
ERR-06000 | ERR_LM_FUNCTION_EXECUTION | Function execution failed: "%s". |
ERR-06001 | ERR_LM_RESPONSE_FAILED | Response failed: %s |
ERR-06002 | ERR_LM_ACCEPT_TIMEOUT | Accept timeout: "%s:%u". |
ERR-06003 | ERR_LM_SEND_BUFFER_OVERFLOW | Send buffer overflow: "%s". |
ERR-06004 | ERR_LM_COMMAND_EXECUTION_FAILED | Command execution failed: Application-Id = %u, Command-Code = %u. |
ERR-06005 | ERR_LM_UNSUPPORTED_COMMAND | Unsupported command: Application-Id = %u, Command-Code = %u. |
ERR-06006 | ERR_LM_ALREADY_CONNECTED | Already connected: "%s". |
ERR-06007 | ERR_LM_CSTR_TO_INT32_FAILED | Failed to convert string "%s" to int. |
ERR-06008 | ERR_LM_DESTINATION_HOST_TOO_LONG | Destination-Host too long: "%s". |
ERR-06009 | ERR_LM_DISCONNECTED | Disconnected: "%s". |
ERR-06010 | ERR_LM_HOST_NOT_FOUND | Host not found: "%s". |
ERR-06011 | ERR_LM_GROUPED_AVP_TOO_DEEP | Grouped AVP too deep: %d. |
ERR-06012 | ERR_LM_HANDSHAKE_TIMEOUT | Handshake timeout: "%s". |
ERR-06013 | ERR_LM_INITIALIZED | Link manager already initialized. |
ERR-06014 | ERR_LM_INVALID_HEADER | Invalid header: "%s". |
ERR-06015 | ERR_LM_INVALID_HOST | Invalid host: "%s" and "%s". |
ERR-06016 | ERR_LM_INVALID_PORT_NO | Invalid port no: %d. |
ERR-06017 | ERR_LM_MESSAGE_TOO_LONG | Message too long: %d |
ERR-06018 | ERR_LM_MISSING_AVP | Missing AVP: "%s" |
ERR-06019 | ERR_LM_NOT_INITIALIZED | Link manager not initialized. |
ERR-06020 | ERR_LM_NO_OPENED_GROUPED_AVP_FOUND | No opened grouped AVP found. |
ERR-06021 | ERR_LM_NULL_POINTER_ACCESS | NULL pointer access: "%s". |
ERR-06022 | ERR_LM_ORIGIN_HOST_TOO_LONG | Origin-Host too long: "%s". |
ERR-06023 | ERR_LM_REQUIRE_REQUEST_MESSAGE | Require request message. |
ERR-06024 | ERR_LM_SESSION_ID_TOO_LONG | Session-Id too long: "%s". |
ERR-06025 | ERR_LM_CONNECTION_TIMEOUT | Connection timeout: "%s". |
ERR-06026 | ERR_LM_UNABLE_TO_BIND_ADDRESS | Unable to bind address: "%s". |
ERR-06027 | ERR_LM_ABORT_CALLBACK_TIMEOUT | Abort callback: "Timeout". |
ERR-06028 | ERR_LM_ABORT_CALLBACK_DISCONNECTED | Abort callback: "Disconnected". |
ERR-06029 | ERR_LM_ABORT_CALLBACK_SHUTDOWN | Abort callback: "Shutdown". |
ERR-06030 | ERR_LM_NO_MORE_ADDRESS | No more address: "%s". |
ERR-06031 | ERR_LM_HANDSHAKE_FAILED | Handshake failed: "%s". |
ERR-06032 | ERR_LM_PROCESS_MEMORY_LIMIT | Failed to allocate connection (Current Allocate Memory / PROCESS_MAX_SIZE (%llu/%llu)). |
ERR-06033 | ERR_LM_ABORT_CONN_FREED | connection object for (%s) has been freed. please retry. |
ERR-06034 | ERR_LM_ABORT_SEND_RETRY_COUNT_EXHAUSETED | The number of send repetitions has been exhausted. |
ERR-07000–ERR-07999 (50)
| コード | シンボル | メッセージ原文 |
|---|---|---|
ERR-07000 | ERR_XM_CREATE_HASH | Error in creating hashtable for global metadata. |
ERR-07001 | ERR_XM_OPEN_META | Error in opening meta. Cannot open meta database. |
ERR-07002 | ERR_XM_EXEC_META | Error in executing meta. Cannot execute meta database |
ERR-07003 | ERR_XM_CLOSE_META | Error in closing meta. Cannot close meta database. |
ERR-07004 | ERR_XM_FETCH_META | Error in fetching meta. |
ERR-07005 | ERR_XM_GLOB_OBJECT_NOT_EXISTS_BY_LOID | No global object found. (Local Object ID=%llu, Host=%s) |
ERR-07006 | ERR_XM_GLOB_OBJECT_NOT_EXISTS_BY_GOID | No global object found. (Global Object ID=%llu, Host=%s) |
ERR-07007 | ERR_XM_GLOB_OBJECT_EXISTS | Global object already exists. (Global Object ID=%llu, Host=%s) |
ERR-07008 | ERR_XM_HASH_ADD_FAILURE | Error in hash add (Memory allocation failed). |
ERR-07009 | ERR_XM_STATEMENT_ALREADY_EXISTS | Failed to add query statement due to unfinished one. |
ERR-07010 | ERR_XM_STATEMENT_NO_EXISTS | Failed to find query statement. |
ERR-07011 | ERR_XM_NOT_SUPPORTED_YET | This query type is not supported yet. |
ERR-07012 | ERR_XM_NOT_SUPPORTED_PLANNODE_YET | This plan node (%s) is not supported yet. |
ERR-07013 | ERR_XM_STATEMENT_CANCELLED | Statement is canceled by the broker. |
ERR-07014 | ERR_XM_NODE_INFO_EXISTS | Node information already exists. |
ERR-07015 | ERR_XM_INVALID_MESSAGE | Invalid message from XM: %u |
ERR-07016 | ERR_XM_DDL_ON_WAREHOUSE_NOT_SUPPORTED | DDL/DELETE statement on warehouse node is not supported. |
ERR-07017 | ERR_XM_NOT_SUPPORTED_AGG_FUNC_YET | This aggregate function (%s) is not supported yet. |
ERR-07018 | ERR_XM_STANDBY_INSERT | INSERT/APPEND to warehouse standby is not available. |
ERR-07019 | ERR_XM_UNSUPPORTED_STMT_TYPE | Unsupported query statement type in the Cluster Edition. |
ERR-07020 | ERR_XM_INTERNAL_ERROR | XM internal error (XMART_POINT:%s) |
ERR-07021 | ERR_XM_XMART_TARGET_NOT_NODE_ID | [XM-ART] Targeted node is not valid. (%s) |
ERR-07022 | ERR_XM_ERROR_VIA_ANSWER_MSG | An error occurred after processing a %s message. [Src='%s']: %s |
ERR-07023 | ERR_XM_ERROR_STAFF_ALREADY_GONE | Execution unit from remote note is already gone. |
ERR-07024 | ERR_XM_INVALID_APPEND_ON_WAREHOUSE | APPEND operation on warehouse node is not supported. |
ERR-07025 | ERR_XM_INVALID_NODE_HOSTS | Host information from broker is invalid. Please check coordinator's status. |
ERR-07026 | ERR_XM_CLUSTER_INVALID | Cluster node information is invalid. |
ERR-07027 | ERR_XM_CLUSTER_CHANGED | Cluster node information has changed during query execution. |
ERR-07028 | ERR_XM_CANNOT_EXPLAIN_STAGE | This execution plan does not need to generate stage(s). |
ERR-07029 | ERR_XM_CLUSTER_CONNECTION_ABORT_TIMEOUT | Cluster connection aborted: Time-out |
ERR-07030 | ERR_XM_CLUSTER_CONNECTION_ABORT_LINK_BROKEN | Cluster connection aborted: Disconnected by warehouse. |
ERR-07031 | ERR_XM_BLOCKED_BY_DEACTIVATED_MODE | DML/DDL is disabled in DEACTIVATED mode. |
ERR-07032 | ERR_XM_DELETE_NOT_AVAILABLE | DELETE is not available since a read-only group exists. |
ERR-07033 | ERR_XM_WAREHOUSE_DROPPED_OUT | Participating warehouse has been dropped out. |
ERR-07034 | ERR_XM_INVALID_BROKER_STORED | Broker info has been changed. Please free statement and initalize again. |
ERR-07035 | ERR_XM_WAREHOUSE_DIRECT_DML_NOW_ALLOWED | Direct DML on warehouse is not allowed. |
ERR-07036 | ERR_XM_WAREHOUSE_NOT_AVAILABLE | Warehouse is not available. |
ERR-07037 | ERR_XM_STAGE_MEMORY_LIMIT | Execution stage memory usage exceeded the limit. (used: %llu, maximum: %llu) |
ERR-07038 | ERR_XM_ARCHIVE_INTERNAL_ERROR | XM archiving error occurred. (%s) |
ERR-07039 | ERR_XM_BROKER_DISCONN | Broker (%s) is disconnected. |
ERR-07040 | ERR_XM_BROKER_NOT_LEADER | Only leader broker can execute DML on LOOKUP table. |
ERR-07041 | ERR_XM_BROKER_REMOTE_ERROR | Remote error. (%s) |
ERR-07042 | ERR_XM_RESTORE_LOOKUP_TIMEOUT | LOOKUP table restore timeout: (%s) |
ERR-07043 | ERR_XM_BROKER_NOT_ACTIVE | Broker is not ACTIVE. |
ERR-07044 | ERR_XM_VERSION_NOT_MATCH | XM version does not match. (%s - %s) |
ERR-07045 | ERR_XM_SNAPSHOT_FAIL | Snapshot failed: %s. |
ERR-07046 | ERR_XM_MESSAGE_EXPIRED | Message %d is expired. |
ERR-07047 | ERR_XM_SNAPSHOT_RECOVER_IN_PROGRESS | Snapshot recover is in progress. |
ERR-07048 | ERR_XM_QUEUE_TIMEOUT | Queue timeout. |
ERR-07049 | ERR_XM_VERSION_UNMATCHED | XM version does not match. (%d - %d) |
ERR-08000–ERR-08999 (109)
| コード | シンボル | メッセージ原文 |
|---|---|---|
ERR-08000 | ERR_CC_FUNCTION_EXECUTION | Function execution failed: "%s". |
ERR-08001 | ERR_CC_BUFFER_OVERRUN | Buffer overrun. |
ERR-08002 | ERR_CC_END_OF_FILE | End of file. |
ERR-08003 | ERR_CC_HEADER_OCCURS_TOO_MANY_TIMES | Header occurs too many times: "%s". |
ERR-08004 | ERR_CC_JSON_DEPTH_OUT_OF_RANGE | JSON depth: Out of range. |
ERR-08005 | ERR_CC_CONNECTION_TIMEOUT | Connection timeout. |
ERR-08006 | ERR_CC_PACKAGE_NOT_FOUND | Package not found: "%s". |
ERR-08007 | ERR_CC_FILE_NAME_MISMATCH | File name mismatch: "%s" and "%s" |
ERR-08008 | ERR_CC_BLOCK_SIZE_OVERRUN | Block size overrun: %llu and %llu |
ERR-08009 | ERR_CC_FILE_SIZE_MISMATCH | File size mismatch: %llu and %llu |
ERR-08010 | ERR_CC_FILE_READ_SIZE_MISMATCH | File read size mismatch: %llu and %llu |
ERR-08011 | ERR_CC_FILE_WRITE_SIZE_MISMATCH | File write size mismatch: %llu and %llu |
ERR-08012 | ERR_CC_NODE_NOT_FOUND | Node not found: "%s" |
ERR-08013 | ERR_CC_NODE_EXIST | Node exist: "%s" |
ERR-08014 | ERR_CC_INVALID_PACKAGE_FILE_SIZE | Invalid package file size: "%s" = %llu / %llu |
ERR-08015 | ERR_CC_UNMATCHED_HOST | Unmatched host: "%s" and "%s" |
ERR-08016 | ERR_CC_DASHBOARD_INITIALIZED | Dashboard initialized |
ERR-08017 | ERR_CC_DASHBOARD_NOT_INITIALIZED | Dashboard is not initialized |
ERR-08018 | ERR_CC_NULL_POINTER_ACCESS | NULL pointer access: "%s". |
ERR-08019 | ERR_CC_STATUS_NOT_FOUND | Status not found: "%s" |
ERR-08020 | ERR_CC_HASH_INSERT_FAILED | Hash insert failed: "%s" |
ERR-08021 | ERR_CC_HASH_DELETE_FAILED | Hash delete failed: "%s" |
ERR-08022 | ERR_CC_HOST_TOO_LONG | Host too long: "%s" |
ERR-08023 | ERR_CC_ACTIVE_TOO_LONG | Active too long: "%s" |
ERR-08024 | ERR_CC_COORDINATOR_HOST_TOO_LONG | Coordinator-Host too long: "%s" |
ERR-08025 | ERR_CC_SPIN_TIMEOUT | Spin timeout |
ERR-08026 | ERR_CC_DDL_DISABLED | DDL disabled: %s |
ERR-08027 | ERR_CC_STATUS_UNINITALIZED | Status uninitialized |
ERR-08028 | ERR_CC_UNSUPPORTED_NODE_TYPE | Unsupported Node-Type: %u |
ERR-08029 | ERR_CC_SEQUENCE_NUMBER_UNINITIALIZED | Sequence number uninitialized |
ERR-08030 | ERR_CC_SEQUENCE_NUMBER_UNMATCHED | Sequence number unmatched: %lld and %lld |
ERR-08031 | ERR_CC_DDL_INCOMPLETED | DDL[%lld] incomplete: [%s] |
ERR-08032 | ERR_CC_INVALID_BROKER_COUNT | Invalid broker count: %lld |
ERR-08033 | ERR_CC_DDL_FAILED | DDL failed |
ERR-08034 | ERR_CC_DDL_SEQUENCE_NOT_FOUND | DDL sequence not found |
ERR-08035 | ERR_CC_INVALID_DDL_STATE | Invalid DDL state: %lld |
ERR-08036 | ERR_CC_INVALID_DDL_RETURNED | Invalid DDL returned: %lld and %lld |
ERR-08037 | ERR_CC_STANDBY_TOO_LONG | Standby too long: "%s" |
ERR-08038 | ERR_CC_INVALID_STATE_CHANGE | Invalid state change: %u => %u |
ERR-08039 | ERR_CC_INVALID_STATE | Invalid state: %u |
ERR-08040 | ERR_CC_INVALID_NODE_TYPE | Invalid Node-Type: %u |
ERR-08041 | ERR_CC_COORDINATOR_INACTIVE | Coordinator inactive |
ERR-08042 | ERR_CC_NOT_LEADER | Only leader can execute DDL. |
ERR-08043 | ERR_CC_DDL_TIMEOUT | DDL timeout |
ERR-08044 | ERR_CC_DDL_ERROR_MESSAGE | %s |
ERR-08045 | ERR_CC_DDL_NOT_FOUND | DDL not found: %llu |
ERR-08046 | ERR_CC_DDL_INCOMPLETNESS | DDL incompleteness: "%s" |
ERR-08047 | ERR_CC_UNSUPPORTED_PACKAGE | Unsupported package: "%s" |
ERR-08048 | ERR_CC_DDL_DISABLED_BY_MODE_CHANGE | DDL disabled by mode change |
ERR-08049 | ERR_CC_FAILED_TO_FORKED_COMMAND | Failed to fork and execute command: %s. Please check deployer's trace log. |
ERR-08050 | ERR_CC_FUNCTION_EXECUTION_WITH_RC | Function execution failed: "%s" (errno=%d). |
ERR-08051 | ERR_CC_DDL_DISABLED_READONLY_GROUP | DDL disabled because a part of group is not normal. |
ERR-08052 | ERR_CC_DDLSYNC_EXECUTE_FAILED_AFTER_RETRY | DDL[%llu] execution during DDL-Sync failed after several attempts. |
ERR-08053 | ERR_CC_INVALID_OPTION | Invalid option (%s). |
ERR-08054 | ERR_CC_GROUP_NOT_FOUND | Group (%s) is not found. |
ERR-08055 | ERR_CC_PORT_CHECK_REQUIRED | Check %s port number (%d). |
ERR-08056 | ERR_CC_DEPLOYER_DISABLED | Deployer is disabled: "%s". |
ERR-08057 | ERR_CC_ONLY_PRIMARY_COORDINATOR_AVAILABLE | Command is not available in the secondary coordinator. |
ERR-08058 | ERR_CC_CLUSTER_SYNC_FAILURE | Cluster synchronization failed. |
ERR-08059 | ERR_CC_INVALID_DECISION_STATE | Invaid decision state: %s |
ERR-08060 | ERR_CC_MISSING_ATTRIBUTE | Missing attribute: %s |
ERR-08061 | ERR_CC_ATTRIBUTE_OCCURS_TOO_MANY_TIMES | Attribute occurs too many times: %s |
ERR-08062 | ERR_CC_EXECUTE_COMMAND_FAILURE | Failed to execute command (%s). |
ERR-08063 | ERR_CC_PACKAGE_ALREADY_EXISTS | Package name or file name already exists (%s = %s). |
ERR-08064 | ERR_CC_HOST_RES_INFO_NOT_FOUND | Host resource info not found: "%s" |
ERR-08065 | ERR_CC_DISK_INFO_NOT_FOUND | Disk info not found: "%s" |
ERR-08066 | ERR_CC_INTEGER_OVERFLOW | Integer overflow. |
ERR-08067 | ERR_CC_COORDINATOR_COUNT_EXCEEDED | The number of coordinators exceeded %d. |
ERR-08068 | ERR_CC_DDL_DISABLED_BY_INITIAL_STATE | DDL disabled since some of nodes are in initial states. |
ERR-08069 | ERR_CC_COORD_ROLE_HANDSHAKE | Coordinator role handshake failed: [%s] |
ERR-08070 | ERR_CC_HOST_RESOURCE_DISABLED | Collecting host resource is disabled. |
ERR-08071 | ERR_CC_REQUEST_FAILED | Request to execute command %s failed. (code=%d) |
ERR-08072 | ERR_CC_CLUSTER_ACTIVATION_FAILED | Cluster activation failed: %lld / %lld. |
ERR-08073 | ERR_CC_ENVIRONMENT_VARIABLE_NOT_SET | Environment (%s) is not set. |
ERR-08074 | ERR_CC_OPTION_DUPLICATED | Option duplicated. |
ERR-08075 | ERR_CC_OPTION_REQUIRED | Option required (%s). |
ERR-08076 | ERR_CC_LOCK_FAILED | Cannot read Lock File! Check $MACHBASE_COORDINATOR_HOME/conf/machbasecoordinator.lock* and Tracelog in $MACHBASE_COORDINATOR_HOME/trc. |
ERR-08077 | ERR_CC_COORDINATOR_RUNNING | Machbase coordinator is running. |
ERR-08078 | ERR_CC_COORDINATOR_NOT_RUNNING | Machbase coordinator is not running. |
ERR-08079 | ERR_CC_COORDINATOR_PHASE1_FAILED | Machbase Coordinator %s Phase1 failed: %s |
ERR-08080 | ERR_CC_COORDINATOR_PHASE2_FAILED | Machbase Coordinator %s Phase2 failed: %s |
ERR-08081 | ERR_CC_COORDINATOR_DEAD | Machbase Coordinator has been DEAD! Check Tracelog in $MACHBASE_COORDINATOR_HOME/trc. |
ERR-08082 | ERR_CC_METADATA_NOT_CREATED | Machbase Coordinator metadata is not created. Check Tracelog in $MACHBASE_COORDINATOR_HOME/trc. |
ERR-08083 | ERR_CC_METADATA_ALREADY_CREATED | Machbase Coordinator metadata is already created. Check Tracelog in $MACHBASE_COORDINATOR_HOME/trc. |
ERR-08084 | ERR_CC_INVALID_PROCESS_ID | Invalid process id. |
ERR-08085 | ERR_CC_OPTION_INIT_FAILED | Option initialization error: %d. |
ERR-08086 | ERR_CC_OPTION_CHECK_FAILED | Option check error: %d. |
ERR-08087 | ERR_CC_OPTION_GET_FAILED | Option retrieval error: %d (%s). |
ERR-08088 | ERR_CC_COMMAND_OPTION_NOT_FOUND | Command option is not found. |
ERR-08089 | ERR_CC_COLLECTING_HOST_RES_FAILED | Failed to collect '%s': %s. |
ERR-08090 | ERR_CC_INVALID_ATTRIBUTE | Invalid attribute: %s |
ERR-08091 | ERR_CC_DDL_RECOVERY_FAILED | DDL recovery failed: %s. |
ERR-08092 | ERR_CC_DESIRED_STATE_NOT_APPLICABLE | Desired state (%s) is not applicable. |
ERR-08093 | ERR_CC_NODE_STILL_RUNNING | %s is still running. |
ERR-08094 | ERR_CC_SNAPSHOT_NOT_EXIST | SNAPSHOT on %s does not exist. |
ERR-08095 | ERR_CC_RECOVER_NON_READONLY | Group %s is not readonly mode. Snapshot recovery works only for a readonly group |
ERR-08096 | ERR_CC_SNAPSHOT_NOT_AVAILABLE | Snapshot is not available: %s |
ERR-08097 | ERR_CC_NOT_SCRAPPED | Warehouse %s is not scrapped. %s only works on a scrapped warehouse. |
ERR-08098 | ERR_CC_MASTER_NOT_FOUND | Cannot add lookup node %s (%s) before adding the lookup master node. |
ERR-08099 | ERR_CC_MASTER_NOT_MONITOR | Lookup monitor node (%s) cannot change the lookup master node. |
ERR-08100 | ERR_CC_SNAPSHOT_FAIL_PUBLISH | Failed to publish SnapshotID to warehouse. |
ERR-08101 | ERR_CC_NOT_READONLY | Group (%s) is not readonly. |
ERR-08102 | ERR_CC_NODE_FIX | Fix node (%s) failed. (refcnt=%d) |
ERR-08103 | ERR_CC_LOOKUP_ALREADY_RUNNING | Lookup node running already. (%s:%d) |
ERR-08104 | ERR_CC_LOOKUP_CONNECT_FAILED | Connect to lookup node failed. (%s:%d) |
ERR-08105 | ERR_CC_LOOKUP_STARTUP_FAILED | Startup lookup node failed. (%s:%d) |
ERR-08106 | ERR_CC_NORMAL_SHUTDOWN | Unable to shutdown warehouse (%s) since it is not INACTIVE status. |
ERR-08107 | ERR_CC_MESSAGE_EXPIRED | Expired message (%llu) received. |
ERR-08108 | ERR_CC_SNAPSHOT_FAIL | Snapshot failed: %s |
ERR-09000–ERR-09999 (11)
| コード | シンボル | メッセージ原文 |
|---|---|---|
ERR-09000 | ERR_RP_BUFFER_POOL_ITEM_ALLOC_FAIL | Failed to allocate buffer pool item. |
ERR-09001 | ERR_RP_TARGET_FILE_OPEN_FAIL | Failed to open replication target file <Table %llu, FileID %llu, PartID %llu - Level %d Type %d> |
ERR-09002 | ERR_RP_PROTOCOL_ERROR | Invalid protocol received. |
ERR-09003 | ERR_RP_SOCKET_ERROR | Socket write failed. |
ERR-09004 | ERR_RP_APPEND_VALUE_ERROR | Failed to append target table<%llu>. |
ERR-09005 | ERR_RP_VALUE_BUFFER_ALLOC_MEM_FAIL | Failed to allocate value buffer. |
ERR-09006 | ERR_RP_TABLE_CURSOR_OPEN_FAIL | Failed to open table <%llu>'s cursor. |
ERR-09007 | ERR_RP_POLL_REMOVE | Failed to remove poll socket. (%d) |
ERR-09008 | ERR_RP_POLL_DESTROY | Failed to destroy poll socket. (%d) |
ERR-09009 | ERR_RP_CANNOT_REPLICATE2_LARGER | Cannot replicate to larger dbs. |
ERR-09010 | ERR_RP_HOST_NOT_FOUND | Host not found: "%s". |
エラーコードの確認方法
- machsqlまたはドライバーが返すエラー文字列を確認します。
- サーバーログは
$MACHBASE_HOME/trc/内のトレースログを確認します。
最終更新日